why does my Honda Accord 10th Generation (2018-2022) use so much oil between changes

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

548 words

Problem Statement

Learn how to diagnose and fix excessive oil consumption in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components.

Symptoms

•Check engine light illuminated
•Oil warning light activated
•Engine exhibits a rough idle
•Increased exhaust smoke (blue or gray)
•Frequent need to add oil between changes
•Poor fuel economy

Diagnostic Steps

1
Scan for error codes using OBD-II scanner to identify any related engine issues.
2
Check engine oil level with the dipstick to determine the amount of oil consumed.
3
Inspect for oil leaks around the oil pan, valve cover, and engine seals.
4
Examine the PCV (Positive Crankcase Ventilation) system for clogs or malfunctions.
5
Perform a compression test to check for internal engine problems such as worn piston rings.
6
Inspect spark plugs for oil fouling indicating oil entering the combustion chamber.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Oil catch pan
•Rags

Parts Required

•Oil filter
•Engine oil (recommended viscosity)
•PCV valve
•Gaskets (if leaks present)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using OBD-II scanner to identify any related engine issues.
2
Check engine oil level with the dipstick to determine the amount of oil consumed.
3
Inspect for oil leaks around the oil pan, valve cover, and engine seals.
4
Examine the PCV (Positive Crankcase Ventilation) system for clogs or malfunctions.
5
Perform a compression test to check for internal engine problems such as worn piston rings.
6
Inspect spark plugs for oil fouling indicating oil entering the combustion chamber.

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, torque wrench, multimeter, oil catch pan, rags.
Safety Warnings: Disconnect the battery before working on electrical systems. Allow the engine to cool before opening any components.

2. Address Oil Leaks

Lift the vehicle using a jack and secure with jack stands.
Remove the undercarriage cover if applicable to access the oil pan.
Clean the area around potential leak points (valve cover, oil pan) with a degreaser.
Inspect gaskets and seals for wear; replace any that are damaged or leaking.
Torque bolts to manufacturer specifications while resealing if necessary.

3. Replace PCV Valve

Locate the PCV valve (usually near the valve cover).
Remove the old PCV valve by twisting and pulling it out.
Install the new PCV valve and ensure it fits snugly.
Reattach any hoses that were disconnected.

4. Perform Compression Test

Remove spark plugs using a socket set.
Insert compression tester into the spark plug hole.
Crank the engine to take the reading; compare results across cylinders.
Replace spark plugs if fouled; ensure proper gap and torque upon installation.

5. Monitor Oil Consumption

Change the oil and filter with high-quality oil and a new filter.
Keep track of oil levels and consumption over the next few thousand miles.
Schedule a follow-up check to assess if the problem persists.