why does my Honda Accord 10th Generation (2018-2022) shake when I come to a stop

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

578 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Ensure the vehicle is securely lifted before working underneath it.

Symptoms

•Shaking or vibration felt in the steering wheel or chassis when braking
•Pulsating brake pedal during braking
•Uneven wear on brake pads or rotors
•Increased stopping distance
•Possible noise from the brakes (squeaking or grinding)

Diagnostic Steps

1
Inspect the brake rotors for warping or uneven wear using a dial indicator.
2
Check the brake pads for wear and ensure they are not worn down to the backing plate.
3
Examine the brake calipers for proper operation and signs of sticking or seizing.
4
Verify the wheel lug nut torque to ensure they are properly tightened.
5
Test the wheel bearings for play or noise by jacking up the car and spinning the wheel.
6
Inspect suspension components (control arms, tie rods, and bushings) for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Brake caliper tool
•Dial indicator
•Brake cleaner

Parts Required

•Brake pads
•Brake rotors (if warped or damaged)
•Brake caliper hardware (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the brake rotors for warping or uneven wear using a dial indicator.
2
Check the brake pads for wear and ensure they are not worn down to the backing plate.
3
Examine the brake calipers for proper operation and signs of sticking or seizing.
4
Verify the wheel lug nut torque to ensure they are properly tightened.
5
Test the wheel bearings for play or noise by jacking up the car and spinning the wheel.
6
Inspect suspension components (control arms, tie rods, and bushings) for wear or damage.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is on a level surface and secure it with wheel chocks.
Disconnect the negative battery terminal for safety.

2. Remove the Wheel

Tools Required: Socket set, torque wrench
Sub-steps:
1. Loosen the lug nuts slightly while the vehicle is still on the ground.
2. Lift the vehicle using a jack and secure it with jack stands.
3. Completely remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Components

Tools Required: Brake caliper tool, brake cleaner, torque wrench
Sub-steps:
1. Remove the brake caliper by unbolting it from the bracket. Support it with a bungee cord to avoid strain on the brake line.
2. Remove the brake pads from the caliper bracket.
3. Check the rotors for warping using a dial indicator; replace if warping exceeds specifications.
4. If necessary, replace the brake pads with OEM or high-quality aftermarket pads.
5. If the rotor is damaged, remove it from the hub and replace it with a new rotor.
6. Reinstall the caliper and torque the bolts to manufacturer's specifications (usually around 20-30 ft-lbs).

4. Reinstall the Wheel

Tools Required: Torque wrench
Sub-steps:
1. Place the wheel back onto the hub.
2. Hand-tighten the lug nuts.
3. Lower the vehicle off the jack stands.
4. Torque the lug nuts to the manufacturer’s specifications (typically around 80-100 ft-lbs).

5. Final Checks

Reconnect the negative battery terminal.
Test the brake pedal for firmness before taking the vehicle for a drive.