why does my Honda Accord 10th Generation (2018-2022) shake when I brake

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

502 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the brake system.
•Allow brakes to cool before inspection or replacement to avoid burns.

Symptoms

•Steering wheel vibrations during braking
•Pulsating brake pedal feel
•Vehicle pulling to one side while braking
•Increased stopping distance
•Brake noise (squeaking or grinding)

Diagnostic Steps

1
Inspect brake pads for wear and thickness using a caliper.
2
Check brake rotors for warping or uneven wear using a runout gauge.
3
Examine brake calipers for proper operation and sticking.
4
Inspect suspension components (tie rods, bushings) for wear or damage.
5
Check tire balance and alignment to rule out related issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Jack
•Jack stands
•Torque wrench
•Brake cleaner
•Runout gauge
•Wrench set

Parts Required

•Brake pads (if worn)
•Brake rotors (if warped)
•Brake caliper hardware (if corroded)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and thickness using a caliper.
2
Check brake rotors for warping or uneven wear using a runout gauge.
3
Examine brake calipers for proper operation and sticking.
4
Inspect suspension components (tie rods, bushings) for wear or damage.
5
Check tire balance and alignment to rule out related issues.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery to ensure safety while working.

2. Remove Wheel

Tools Required: Socket set, jack, jack stands
Sub-steps:
1. Loosen the lug nuts slightly while the vehicle is still on the ground.
2. Raise the vehicle using a jack and secure it with jack stands.
3. Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Components

Tools Required: Torque wrench, brake cleaner, wrench set
Sub-steps:
1. Remove the brake caliper by unbolting it from the bracket.
2. Hang the caliper using wire to avoid putting stress on the brake line.
3. Remove the brake pads from the caliper bracket.
4. Inspect the brake rotor for warping using a runout gauge. Replace if necessary.
5. Clean the rotor surface with brake cleaner to remove any contaminants.
6. If the rotor is within specification, reinstall it; otherwise, replace it with a new rotor.
7. Install new brake pads ensuring they slide smoothly into the caliper bracket.
8. Reattach the brake caliper and torque the bolts to manufacturer specifications (usually around 25-30 ft-lbs).

4. Reassemble and Recheck

Tools Required: Torque wrench
Sub-steps:
1. Reinstall the wheel and hand-tighten the lug nuts.
2. Lower the vehicle off the jack stands using the jack.
3. Torque the lug nuts in a star pattern to the manufacturer’s specification (typically 80-100 ft-lbs).