why does my Honda Accord 10th Generation (2018-2022) shake when I accelerate

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

521 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms and solutions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted on jack stands before working underneath.
•Allow engine and brake components to cool before inspection or repair.

Symptoms

•Vehicle shakes or vibrates during acceleration
•Steering wheel vibrates noticeably
•Possible loss of power during acceleration
•Increased engine noise
•Vibrations felt in the seats or floor

Diagnostic Steps

1
Inspect tires for imbalances or damage by checking tread wear and pressure.
2
Check for any visible damage to the suspension components, including bushings and joints.
3
Examine the driveshaft and CV joints for wear or damage.
4
Scan the vehicle's computer for any error codes related to the engine or transmission.
5
Test the engine mounts for wear or deterioration.
6
Inspect the brake system for any sticking calipers or warped rotors.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Socket set
•Torque wrench
•Tire pressure gauge

Parts Required

•Tires (if damaged)
•Suspension components (if worn)
•CV joints (if damaged)
•Engine mounts (if damaged)
•Brake rotors and pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for imbalances or damage by checking tread wear and pressure.
2
Check for any visible damage to the suspension components, including bushings and joints.
3
Examine the driveshaft and CV joints for wear or damage.
4
Scan the vehicle's computer for any error codes related to the engine or transmission.
5
Test the engine mounts for wear or deterioration.
6
Inspect the brake system for any sticking calipers or warped rotors.

Solution

1. Preparation

Gather tools: jack, jack stands, socket set, torque wrench, tire pressure gauge.
Ensure the vehicle is on a flat surface and engage the parking brake.

2. Tire Inspection

Sub-steps:
1. Remove the wheel covers if equipped.
2. Check tire pressure using a tire pressure gauge; inflate to the manufacturer's specifications if necessary.
3. Inspect the tires for uneven tread wear or visible damage. Replace if necessary.
4. Balance the tires if any imbalances are found.

3. Suspension Component Check

Sub-steps:
1. Visually inspect all suspension components including struts, shock absorbers, and bushings for any signs of wear or damage.
2. Replace any worn or damaged components.
3. Torque all bolts to the manufacturer's specifications.

4. Driveshaft and CV Joint Inspection

Sub-steps:
1. Inspect the driveshaft for any signs of damage or excessive play.
2. Check CV joints for torn boots or grease leakage. Replace if necessary.
3. Ensure all connections are secured and free of rust.

5. Engine Mount Inspection

Sub-steps:
1. Check engine mounts for cracks or excessive wear.
2. Replace any damaged mounts with OEM parts.
3. Torque the new mounts to the specified values.

6. Brake System Check

Sub-steps:
1. Inspect brake rotors for warping or uneven wear.
2. Replace warped rotors and check pads for even wear.
3. Ensure calipers are functioning smoothly and free from sticking.