why does my Honda Accord 10th Generation (2018-2022) shake when I accelerate

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

529 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting components.

Symptoms

•Shaking or vibrating sensation during acceleration
•Increased vibrations at higher speeds
•Steering wheel vibration
•Possible loss of power during acceleration
•Unusual noises (e.g., clunking or grinding sounds)

Diagnostic Steps

1
Inspect the tires for uneven wear or damage; check tire pressure.
2
Check for any visible damage or play in suspension components (e.g., control arms, bushings).
3
Examine the driveshaft and CV joints for signs of wear or damage.
4
Scan for any error codes using an OBD-II scanner to identify potential electronic issues.
5
Inspect engine and transmission mounts for wear or damage.
6
Test the alignment and balance of the wheels.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack
•Jack stands
•Tire iron
•Wrench set
•Socket set
•Torque wrench
•Pliers
•OBD-II scanner

Parts Required

•Tires (if damaged)
•Suspension components (if worn)
•CV joints (if damaged)
•Engine/transmission mounts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the tires for uneven wear or damage; check tire pressure.
2
Check for any visible damage or play in suspension components (e.g., control arms, bushings).
3
Examine the driveshaft and CV joints for signs of wear or damage.
4
Scan for any error codes using an OBD-II scanner to identify potential electronic issues.
5
Inspect engine and transmission mounts for wear or damage.
6
Test the alignment and balance of the wheels.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.
Disconnect the battery for safety.

2. Tire Inspection and Replacement

Sub-steps:
1. Check tire pressure and inflate to the manufacturer’s specifications if low.
2. Inspect tires for uneven wear patterns; replace tires if necessary.
3. Rotate the tires if uneven wear is found to distribute wear evenly.
Tools Required: Tire pressure gauge, jack, jack stands, tire iron.

3. Suspension Component Inspection

Sub-steps:
1. Lift the front of the vehicle using a jack and secure it with jack stands.
2. Visually inspect control arms, bushings, and struts for any signs of wear or damage.
3. Replace any worn or damaged components.
Tools Required: Wrench set, socket set, torque wrench.

4. Driveshaft and CV Joint Inspection

Sub-steps:
1. Inspect the driveshaft for any visible damage or looseness.
2. Examine CV joints for torn boots or grease leakage; replace if damaged.
Tools Required: Pliers, socket set.

5. Mounts Inspection and Replacement

Sub-steps:
1. Inspect engine and transmission mounts for cracks or excessive wear.
2. Replace any mounts that show signs of damage.
Tools Required: Socket set, torque wrench.

6. Wheel Alignment and Balancing

Sub-steps:
1. Take the vehicle to a professional alignment shop.
2. Request a wheel alignment and balancing service.
Tools Required: None (professional service required).