why does my Honda Accord 10th Generation (2018-2022) make noise when braking

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

490 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake noise issues in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses and gloves when working on the braking system.
•Ensure the vehicle is securely lifted and supported before working underneath.

Symptoms

•Squeaking or squealing noise when applying brakes
•Grinding noise when braking
•Pulsation or vibration felt through the brake pedal
•Reduced braking efficiency
•Brake warning light illuminated on the dashboard

Diagnostic Steps

1
Inspect brake pads for wear and thickness using a visual inspection.
2
Check brake rotors for grooves, rust, or warping.
3
Listen for noise while applying brakes at low speeds to determine the type of sound.
4
Inspect brake calipers for proper operation and any signs of sticking.
5
Check for debris or contaminants on the brake components.
6
Examine brake fluid level and quality.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Socket set
•Torque wrench
•Brake grease
•Bungee cord or rope

Parts Required

•Brake pads (front and/or rear, as needed)
•Brake rotors (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and thickness using a visual inspection.
2
Check brake rotors for grooves, rust, or warping.
3
Listen for noise while applying brakes at low speeds to determine the type of sound.
4
Inspect brake calipers for proper operation and any signs of sticking.
5
Check for debris or contaminants on the brake components.
6
Examine brake fluid level and quality.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a flat surface and the ignition is off.
Raise the vehicle using a jack and secure it with jack stands.

2. Remove Wheel

Use a lug wrench to loosen the lug nuts.
Remove the lug nuts and take off the wheel to access the brake components.

3. Inspect and Replace Brake Pads

Remove the caliper bolts with a socket wrench.
Carefully slide the caliper off the brake pads and suspend it using a bungee cord to avoid stress on the brake line.
Remove the old brake pads from the caliper bracket.
Compare new brake pads to old ones to ensure proper fit (thickness and shape).
Apply brake grease to the back of the new pads to prevent squeaking.
Install new brake pads into the caliper bracket.

4. Inspect and Replace Brake Rotors (if necessary)

Remove any retaining screws from the rotor.
Slide the rotor off the hub. If it's stuck, gently tap it with a rubber mallet.
Install the new rotor, ensuring it sits flush against the hub.
If reusing the rotor, ensure it is properly machined or resurfaced.

5. Reassemble Brake Components

Reinstall the caliper over the new pads.
Tighten caliper bolts to the manufacturer's specifications (usually around 25-30 lb-ft).
Reattach the wheel and hand-tighten the lug nuts.

6. Lower Vehicle and Test

Lower the vehicle and torque the lug nuts to manufacturer specifications (usually 80-100 lb-ft).
Pump the brake pedal a few times to ensure proper pad seating.
Take the vehicle for a test drive to confirm the noise has been resolved.

Tools Required:

Lug wrench
Socket set
Torque wrench
Brake grease
Bungee cord or rope

Parts Required:

Brake pads (front and/or rear, as needed)
Brake rotors (if replacement is necessary)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Always wear safety glasses and gloves when working on the braking system.
Ensure the vehicle is securely lifted and supported before working underneath.