why does my Honda Accord 10th Generation (2018-2022) make a loud noise during acceleration

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

497 words

Problem Statement

Diagnose and fix loud noise during acceleration in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic and repair instructions.

Affected Component

Exhaust System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting the exhaust system.

Symptoms

•Loud noise that increases with acceleration
•Possible vibrations felt in the cabin or steering wheel
•Decreased engine performance or responsiveness
•Check engine light may be illuminated
•Unusual exhaust smells (if exhaust leak is present)

Diagnostic Steps

1
Inspect the exhaust system for visible leaks or damage.
2
Perform a visual inspection of engine mounts for wear or damage.
3
Use an OBD-II scanner to check for any stored error codes.
4
Check the air intake system for loose components or obstructions.
5
Conduct a road test to replicate the noise and assess its characteristics.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Flashlight
•Exhaust repair kit (if necessary)

Parts Required

•Exhaust pipe or muffler (if damaged)
•Engine mounts (if worn)
•Air intake hoses (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the exhaust system for visible leaks or damage.
2
Perform a visual inspection of engine mounts for wear or damage.
3
Use an OBD-II scanner to check for any stored error codes.
4
Check the air intake system for loose components or obstructions.
5
Conduct a road test to replicate the noise and assess its characteristics.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the negative battery terminal for safety.

2. Inspect and Repair Exhaust System

Inspection:
- Use a flashlight to check for cracks or holes in the exhaust pipes, muffler, and catalytic converter.
- Listen for hissing sounds that may indicate a leak.
Repair:
- If a leak is found, use an exhaust repair kit or replace the damaged section of the exhaust.
- Ensure all clamps and hangers are secure and replace any that are worn.

3. Check Engine Mounts

Inspection:
- Visually inspect the engine mounts for cracks or separation.
Replacement:
- If damaged, use a socket set to remove the old engine mount bolts.
- Replace with new engine mounts, ensuring they are torqued to the manufacturer’s specifications.

4. Inspect Air Intake System

Inspection:
- Check air intake hoses for cracks or loose fittings.
Repair:
- Tighten any loose clamps or replace damaged hoses.

5. Reconnect Battery and Test

Reconnect the negative battery terminal.
Start the engine and perform a road test to ensure the noise has been resolved.