why does my Honda Accord 10th Generation (2018-2022) make a grinding noise when I brake

Honda Accord 8th Generation (2008-2012)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

428 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn to diagnose and fix grinding noise when braking in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms and solutions.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always support the vehicle securely before working underneath.
•Disconnect the battery before working on electronic brake systems if applicable.
•Allow brakes to cool before inspection or repair.

Symptoms

•Grinding noise when applying brakes
•Decreased braking performance
•Vibration in the brake pedal
•Warning light illuminated on the dashboard (if applicable)
•Brake dust accumulation on wheels

Diagnostic Steps

1
Inspect brake pads for wear and thickness using a visual check.
2
Check brake rotors for scoring or damage.
3
Examine calipers for proper function and any signs of sticking or wear.
4
Inspect brake lines for leaks or damage.
5
Test drive the vehicle to replicate the noise and assess braking performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Brake cleaner
•Torque wrench

Parts Required

•Brake pads (if worn)
•Brake rotors (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: Jack and jack stands, lug wrench, brake cleaner, torque wrench.
Lift the vehicle and secure it on jack stands.
Remove the wheel using the lug wrench.

2. Inspect Brake Pads and Rotors

Sub-steps:
1. Remove the caliper bolts using the appropriate socket.
2. Carefully slide the caliper off the rotor and hang it using a bungee cord to avoid stressing the brake line.
3. Check the brake pads for thickness; replace if less than 3mm.
4. Inspect the rotors for grooves or scoring; replace if damaged or excessively worn.
Safety Warning: Always support the vehicle securely before working underneath.

3. Replace Brake Pads (if necessary)

Sub-steps:
1. Remove the old brake pads from the caliper bracket.
2. Apply brake grease to the backing of the new pads to reduce noise.
3. Install the new brake pads in the caliper bracket.

4. Reassemble and Torque

Sub-steps:
1. Reposition the caliper over the new pads.
2. Tighten the caliper bolts to the manufacturer's torque specifications (typically around 20-30 ft-lbs).
3. Reinstall the wheel and lower the vehicle.