why does my Honda Accord 10th Generation (2018-2022) make a grinding noise when I brake?

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

490 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn to diagnose and fix grinding noise when braking in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms and solutions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Allow the brakes to cool down before handling components after driving.

Symptoms

•Grinding noise when applying brakes
•Vibration or pulsation through the brake pedal
•Reduced braking effectiveness
•Warning light on the dashboard (if applicable)
•Unusual wear on brake pads or rotors

Diagnostic Steps

1
Inspect brake pads for wear and damage.
2
Check brake rotor surfaces for scoring or warping.
3
Examine brake calipers for proper operation and any sticking.
4
Verify brake fluid level and condition.
5
Listen for any noise while performing a low-speed brake test.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner
•Bungee cord

Parts Required

•Brake pads
•Brake rotors (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Wear safety gloves and goggles for protection.

2. Remove Wheel

Loosen lug nuts slightly while the vehicle is on the ground.
Lift the vehicle using a jack and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Pads

Remove the caliper bolts using a socket wrench.
Carefully lift the caliper away from the rotor; support it with a bungee cord to avoid stress on the brake line.
Remove the old brake pads from the caliper bracket and inspect for wear.
Install new brake pads, ensuring they are properly seated in the caliper bracket.

4. Inspect and Resurface/Replace Rotors

Check the rotor surface for scoring or uneven wear. If damaged, consider resurfacing or replacing.
If resurfacing, use a brake lathe; if replacing, remove the rotor by unbolting it from the hub.
Install the new or resurfaced rotor and torque to manufacturer specifications.

5. Reassemble and Test

Reattach the caliper over the new brake pads and torque caliper bolts to manufacturer specifications.
Reinstall the wheel and hand-tighten lug nuts.
Lower the vehicle and fully tighten lug nuts in a crisscross pattern.
Pump the brake pedal a few times to ensure proper pad seating and check for any noise.