why does my Honda Accord 10th Generation (2018-2022) keep stalling while driving

Solution

1. Preparation

• Gather tools and parts required for repairs.
• Disconnect the negative battery terminal to ensure safety during repairs.

2. Inspect Fuel System

• Fuel Pump Testing:

  • Locate the fuel pump relay and check for proper operation using a multimeter.
  • Remove the fuel pump access panel (if applicable) and test the voltage at the pump connector.
  • Required Tools: Multimeter, socket set.

• Replace Fuel Filter:

  • Locate the fuel filter, typically found along the fuel line.
  • Use a wrench to disconnect the fuel lines; be cautious of fuel spillage.
  • Replace with a new fuel filter and reconnect the lines securely.

3. Check Ignition System

• Inspect Spark Plugs:

  • Remove the spark plug wires and unscrew the spark plugs using a socket wrench.
  • Inspect for wear, carbon deposits, or damage; replace if necessary.
  • Torque new spark plugs to manufacturer specifications (usually around 13 lb-ft).

• Examine Ignition Coils:

  • Disconnect the ignition coil connectors and remove the coils.
  • Test each coil with a multimeter for resistance and replace any faulty units.

4. Clean Air Intake System

• Air Filter Replacement:
  • Remove the air intake cover and take out the old air filter.
  • Install a new air filter, ensuring it is seated properly.
• Throttle Body Cleaning:
  • Disconnect the throttle body from the intake manifold.
  • Clean with throttle body cleaner and a soft cloth; ensure no cleaner enters the intake.