why does my Honda Accord 10th Generation (2018-2022) feel bouncy over bumps

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

476 words

Problem Statement

Learn how to diagnose and fix a bouncy ride in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Allow the vehicle to cool before working on suspension components if it has been driven recently.

Symptoms

•Noticeable bouncing or oscillation after hitting bumps
•Excessive body roll during turns
•Poor handling or instability at higher speeds
•Increased noise or clunking sounds from the suspension
•Uneven tire wear

Diagnostic Steps

1
Inspect the shock absorbers/struts for leaks or physical damage.
2
Check the suspension bushings for wear or deterioration.
3
Examine the alignment settings using a wheel alignment machine.
4
Test drive the vehicle on different surfaces to assess suspension performance.
5
Measure the ride height to ensure it's within manufacturer specifications.
6
Inspect the tires for appropriate inflation and tread wear pattern.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Wrench set
•Jack and jack stands
•Bushing removal/installation tools
•Torque wrench

Parts Required

•Shock absorbers (front/rear as needed)
•Suspension bushings (as necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the shock absorbers/struts for leaks or physical damage.
2
Check the suspension bushings for wear or deterioration.
3
Examine the alignment settings using a wheel alignment machine.
4
Test drive the vehicle on different surfaces to assess suspension performance.
5
Measure the ride height to ensure it's within manufacturer specifications.
6
Inspect the tires for appropriate inflation and tread wear pattern.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery (if working on electrical components).

2. Inspect and Replace Shock Absorbers

Sub-steps:
1. Lift the front or rear of the vehicle using a jack and secure it with jack stands.
2. Remove the wheel to access the shock absorber.
3. Check for any signs of oil leakage or physical damage on the shock absorber.
4. Unscrew the top mounting bolts and bottom bolts of the shock absorber using a socket set.
5. Remove the worn shock absorber from the vehicle.
6. Install the new shock absorber in reverse order, ensuring to torque the bolts to manufacturer specifications (typically around 30-50 ft-lbs).
7. Reinstall the wheel and lower the vehicle.

3. Inspect and Replace Suspension Bushings (if necessary)

Sub-steps:
1. Use a wrench to remove any components attached to the bushings (if applicable).
2. Remove the old bushings from the control arms or sway bar by pressing them out using a bushing removal tool.
3. Clean the mating surfaces before installing new bushings.
4. Press in new bushings using a bushing installation tool or a suitable press.
5. Reattach any components removed earlier and ensure they are torqued to specifications.