what should I do if my Honda Accord 8th Generation (2008-2012) shakes when I accelerate?

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

574 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Accord 2008-2012. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow the engine to cool before working on the vehicle.
•Disconnect the battery if working on electrical components.

Symptoms

•Shaking or vibration felt through the steering wheel or floorboard during acceleration
•Increased noise from the engine or drivetrain
•Vibration that intensifies with speed
•Uneven tire wear
•Steering wheel misalignment or pulling to one side

Diagnostic Steps

1
Inspect Tires: Check for uneven wear, damage, or improper inflation.
2
Check Wheel Balancing: Verify if the wheels are properly balanced; unbalanced wheels can cause shaking.
3
Examine Suspension Components: Inspect control arms, bushings, and struts for wear or damage.
4
Test Driveshaft and CV Joints: Look for play or damage in the driveshaft and constant velocity (CV) joints.
5
Scan for Error Codes: Use an OBD-II scanner to check for any related error codes that may indicate engine or transmission issues.
6
Inspect Engine and Transmission Mounts: Check for any signs of wear or failure in the mounts that could cause vibrations.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Jack and jack stands
•Tire pressure gauge
•Torque wrench
•Socket set
•Inspection light

Parts Required

•Tires (if needed)
•Suspension components (if worn)
•Engine and transmission mounts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect Tires: Check for uneven wear, damage, or improper inflation.
2
Check Wheel Balancing: Verify if the wheels are properly balanced; unbalanced wheels can cause shaking.
3
Examine Suspension Components: Inspect control arms, bushings, and struts for wear or damage.
4
Test Driveshaft and CV Joints: Look for play or damage in the driveshaft and constant velocity (CV) joints.
5
Scan for Error Codes: Use an OBD-II scanner to check for any related error codes that may indicate engine or transmission issues.
6
Inspect Engine and Transmission Mounts: Check for any signs of wear or failure in the mounts that could cause vibrations.

Solution

1. Preparation

Gather Tools: OBD-II scanner, jack and jack stands, tire pressure gauge, torque wrench, socket set, and inspection light.
Safety Precautions: Ensure the vehicle is on a flat surface, engage the parking brake, and wear safety glasses.

2. Inspect Tires

Check Tire Pressure: Use a tire pressure gauge to verify that all tires are inflated to the manufacturer's specifications.
Visual Inspection: Look for cracks, bulges, or uneven wear patterns.
Replace Tires if Necessary: If tires are worn or damaged, replace them with new tires of the same size and specifications.

3. Balance Wheels

Remove Wheels: Use a jack to lift the vehicle and a socket set to remove the wheels.
Balance Wheels: Use a wheel balancing machine or take them to a professional shop to balance them properly.
Reinstall Wheels: Torque the lug nuts to the manufacturer's specifications (usually around 80-100 ft-lbs).

4. Inspect Suspension and Drivetrain

Visual Inspection: Look for any damaged or worn suspension parts, including struts, bushings, and control arms.
Replace Worn Parts: If any components are damaged, replace them with OEM or high-quality aftermarket parts.
Check CV Joints: Inspect for any torn boots or excessive play; replace if necessary.

5. Check Engine and Transmission Mounts

Visual Inspection: Check for cracks or separation in the mounts.
Replace Mounts: If mounts are worn, replace them with OEM parts, ensuring proper alignment and torque settings.