what are the signs my Honda Accord 10th Generation (2018-2022) struts are worn out?

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

583 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn to identify signs of worn struts in Honda Accord 10th Generation (2018-2022). Follow our diagnostic steps and repair guide for better handling and safety.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely raised and supported on jack stands before working underneath.
•Always wear safety glasses and gloves when working on suspension components.

Symptoms

•Vehicle exhibits excessive bouncing or swaying during driving.
•Uneven tire wear, particularly on the inner or outer edges.
•Deteriorated ride quality; feeling every bump or jolt in the road.
•Increased stopping distance or instability when braking.
•Noise such as clunking or knocking sounds over bumps.
•Difficulty maintaining control during sharp turns or cornering.

Diagnostic Steps

1
Visually inspect the struts for signs of oil leakage.
2
Check for physical damage or corrosion on strut components.
3
Perform a bounce test by pushing down on the front or rear of the vehicle and observing how quickly it returns to its normal position.
4
Inspect the tires for uneven wear patterns.
5
Test drive the vehicle to assess handling, ride comfort, and any noises during operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Socket set
•Wrench set
•Torque wrench

Parts Required

•New strut assembly (front or rear as needed)
•Sway bar link (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Vehicle exhibits excessive bouncing or swaying during driving.

•Uneven tire wear, particularly on the inner or outer edges.

•Deteriorated ride quality; feeling every bump or jolt in the road.

•Increased stopping distance or instability when braking.

•Noise such as clunking or knocking sounds over bumps.

•Difficulty maintaining control during sharp turns or cornering.

Diagnostic Steps

1
Visually inspect the struts for signs of oil leakage.
2
Check for physical damage or corrosion on strut components.
3
Perform a bounce test by pushing down on the front or rear of the vehicle and observing how quickly it returns to its normal position.
4
Inspect the tires for uneven wear patterns.
5
Test drive the vehicle to assess handling, ride comfort, and any noises during operation.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a flat, level surface and engage the parking brake.
Wear safety glasses and gloves.

2. Remove Wheel

Sub-steps:
- Loosen the lug nuts on the wheel where the strut will be replaced.
- Raise the vehicle using a jack and secure it with jack stands.
- Remove the lug nuts completely and take off the wheel.
Tools Required: Jack, jack stands, lug wrench.

3. Remove Strut Assembly

Sub-steps:
- Remove any brake line clips or brackets that may obstruct the strut removal.
- Disconnect the sway bar link from the strut if applicable.
- Remove the bolts securing the strut at the bottom and top mounts.
- Carefully remove the strut assembly from the vehicle.
Tools Required: Socket set, wrench set.

4. Install New Strut

Sub-steps:
- Position the new strut assembly in place.
- Secure the strut to the vehicle by tightening the top and bottom bolts to manufacturer specifications (typically around 45-60 ft-lbs for strut bolts; consult repair manual for exact values).
- Reconnect the sway bar link and brake line clips.
Tools Required: Torque wrench.

5. Reinstall Wheel

Sub-steps:
- Place the wheel back on the hub and hand-tighten the lug nuts.
- Lower the vehicle off the jack stands using the jack.
- Tighten the lug nuts to the manufacturer's torque specification (usually 80-100 ft-lbs).
Tools Required: Torque wrench.

6. Final Checks

Sub-steps:
- Inspect the installation for any loose connections or components.
- Recheck the strut assembly for proper alignment.
Tools Required: None additional.