my Honda Accord 8th Generation (2008-2012) shakes when I brake, what could it be

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

483 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord 8th Generation (2008-2012). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool down before working on the brakes to avoid burns.

Symptoms

•Vehicle shakes or vibrates when braking
•Steering wheel vibrates during braking
•Uneven brake pad wear
•Brake pedal pulsates
•Increased stopping distance

Diagnostic Steps

1
Inspect brake pads for wear and thickness.
2
Check brake rotors for warping or scoring.
3
Examine brake calipers for proper function and sticking.
4
Inspect wheel bearings for play or damage.
5
Check suspension components for wear or damage.
6
Perform a road test to confirm symptoms.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Bungee cord or rope
•Brake cleaner

Parts Required

•Brake pads
•Brake rotors (if warped)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts required for the repair.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery terminal to prevent electrical issues.

2. Remove Wheel

Use a jack to lift the vehicle and secure it with jack stands.
Remove the lug nuts with a socket set and take off the wheel.

3. Inspect and Replace Brake Components

A. Brake Pads

Remove the caliper bolts using a socket set.
Slide the caliper off the rotor and support it with a bungee cord (do not let it hang by the brake line).
Remove old brake pads and inspect for even wear; replace if necessary.

B. Brake Rotors

Inspect the brake rotor for warping or scoring using a straight edge or caliper.
If warped, remove the rotor by unscrewing the retaining screws (if applicable) and pulling it off.
Replace with a new rotor if necessary; ensure it meets manufacturer specifications.

4. Reassemble Components

Reinstall the new or serviced brake pads into the caliper.
Reattach the caliper to the bracket and tighten the caliper bolts to manufacturer specifications (typically around 25-35 ft-lbs).
Replace the wheel and hand-tighten the lug nuts.

5. Lower Vehicle and Final Checks

Carefully lower the vehicle off the jack stands.
Torque the lug nuts to manufacturer specifications (usually 80-100 ft-lbs).
Reconnect the negative battery terminal.