my Honda Accord 8th Generation (2008-2012) shakes when braking, what should I do

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

514 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord 8th Generation (2008-2012). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses and gloves when working on brake systems.
•Allow brake components to cool before handling to avoid burns.

Symptoms

•Steering wheel shakes during braking
•Vehicle shudders or vibrates throughout the cabin
•Brake pedal pulsates when applied
•Uneven brake pad wear observed
•Increased stopping distance

Diagnostic Steps

1
Inspect brake pads for uneven wear or damage.
2
Check brake rotors for warping or scoring.
3
Inspect suspension components for wear or damage (e.g., control arms, bushings).
4
Examine wheel alignment and balance.
5
Scan for any error codes related to the brake system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack
•Jack stands
•Caliper tool
•Dial gauge
•Wrench set
•Torque wrench

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.

2. Remove Wheel

Sub-steps:
1. Loosen lug nuts slightly while the wheel is still on the ground.
2. Raise the vehicle using a jack and secure it with jack stands.
3. Remove the wheel completely.
Tools Required: Lug wrench, jack, jack stands.

3. Inspect Brake Components

Sub-steps:
1. Remove the brake caliper by unbolting it from the bracket.
2. Hang the caliper securely using a bungee cord or wire, avoiding strain on the brake line.
3. Inspect brake pads for wear; replace if they are below the minimum thickness.
4. Measure rotor thickness and check for warping using a dial gauge; replace if warped beyond specifications (usually 0.004 inches).
5. If rotors are within specifications but have uneven wear, consider machining them to restore a flat surface.
Tools Required: Caliper tool, dial gauge, wrench set.

4. Replace or Machine Rotors (if necessary)

Sub-steps:
1. If replacing, remove the old rotor by unbolting it from the hub.
2. Install the new rotor, ensuring it is seated properly.
3. If machining, take the rotors to a machine shop and reinstall them after they have been machined.
Tools Required: Torque wrench for proper rotor installation.

5. Reassemble and Test

Sub-steps:
1. Reinstall the brake caliper and ensure it is bolted securely.
2. Reinstall the wheel and hand-tighten the lug nuts.
3. Lower the vehicle and torque the lug nuts to the manufacturer’s specifications.
Tools Required: Torque wrench.