my Honda Accord 10th Generation (2018-2022) shakes when accelerating what's wrong

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

568 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the hood or inspecting engine mounts.

Symptoms

•Vibration felt in the steering wheel or seats during acceleration
•Unusual noise accompanying the shaking (e.g., clunking or grinding)
•Decreased acceleration power or responsiveness
•Check engine light illuminated (if applicable)
•Shaking only occurs at specific speeds or RPM ranges

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any underlying engine or transmission issues.
2
Inspect the tires for uneven wear, damage, or improper inflation, as these can contribute to vibrations.
3
Check the wheel alignment and balance to ensure proper handling and stability.
4
Inspect the driveshaft and CV joints for any signs of wear or damage.
5
Examine the engine and transmission mounts for signs of deterioration or failure.
6
Test the suspension components, including struts and bushings, for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Jack
•Jack stands
•Tire pressure gauge

Parts Required

•Tires (if replacement is necessary)
•Engine and transmission mounts (if worn)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any underlying engine or transmission issues.
2
Inspect the tires for uneven wear, damage, or improper inflation, as these can contribute to vibrations.
3
Check the wheel alignment and balance to ensure proper handling and stability.
4
Inspect the driveshaft and CV joints for any signs of wear or damage.
5
Examine the engine and transmission mounts for signs of deterioration or failure.
6
Test the suspension components, including struts and bushings, for wear or damage.

Solution

1. Preparation

Gather tools: OBD-II scanner, socket set, torque wrench, jack, jack stands, and a tire pressure gauge.
Ensure the vehicle is parked on a level surface and engage the parking brake.

2. Address Tire Issues

Sub-step 1: Inspect each tire for visible damage, wear patterns, or improper inflation.
Sub-step 2: Inflate tires to the recommended pressure as specified in the owner's manual.
Sub-step 3: If uneven wear is detected, rotate or replace tires as necessary.

3. Alignment and Balance

Sub-step 1: Take the vehicle to a professional alignment shop.
Sub-step 2: Have the technician perform a wheel balance check and adjust as needed.
Sub-step 3: Request a four-wheel alignment to ensure proper handling.

4. Inspect Drivetrain Components

Sub-step 1: Lift the vehicle with a jack and secure it on jack stands.
Sub-step 2: Visually inspect the driveshaft and CV joints for cracks or lubrication issues.
Sub-step 3: Replace any damaged components, ensuring proper torque specifications are followed during installation.

5. Check Engine and Transmission Mounts

Sub-step 1: Inspect the engine and transmission mounts for cracks or signs of wear.
Sub-step 2: If mounts are found to be faulty, remove the old mounts and install new ones, ensuring they are torqued to the manufacturer’s specifications.

6. Suspension Inspection

Sub-step 1: Check struts and shock absorbers for leaks or damage.
Sub-step 2: Replace any worn suspension parts, following the manufacturer’s torque specifications during installation.