my Honda Accord 10th Generation (2018-2022) makes a grinding noise when turning

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

560 words

Problem Statement

Learn how to diagnose and fix grinding noise when turning in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms and solutions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components.
•Use jack stands to secure the vehicle when working underneath it.

Symptoms

•Grinding noise when turning the steering wheel
•Difficulty steering or feeling of resistance
•Vibration through the steering wheel
•Uneven tire wear
•Fluid leaks near the wheels or steering components

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible damage to the CV joints or axles.
3
Examine the suspension components, including control arms and bushings, for wear or damage.
4
Listen for noise while stationary and turning the steering wheel to isolate the source.
5
Inspect wheel bearings for play or noise when spinning the wheel by hand.
6
Check the condition of the tires for any irregularities or foreign objects lodged in the tread.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack and jack stands
•Bearing puller
•Screwdrivers
•Pliers

Parts Required

•Power steering fluid
•CV joint or axle (if damaged)
•Suspension components (if worn)
•Wheel bearing (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible damage to the CV joints or axles.
3
Examine the suspension components, including control arms and bushings, for wear or damage.
4
Listen for noise while stationary and turning the steering wheel to isolate the source.
5
Inspect wheel bearings for play or noise when spinning the wheel by hand.
6
Check the condition of the tires for any irregularities or foreign objects lodged in the tread.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Gather tools and parts needed for the repair.

2. Inspect and Replace Power Steering Fluid

Sub-steps:
1. Locate the power steering reservoir.
2. Check the fluid level; if low, fill with the manufacturer-recommended power steering fluid.
3. If fluid is dark or contaminated, drain and replace the fluid.

3. Replace Damaged CV Joints or Axles

Sub-steps:
1. Secure the vehicle on jack stands.
2. Remove the wheel corresponding to the affected side.
3. Disconnect the axle nut using a socket wrench.
4. Remove the axle from the transmission and wheel hub.
5. Install the new CV joint or axle, ensuring it is properly seated.
6. Reattach the axle nut and torque to manufacturer specifications.
7. Reinstall the wheel and lower the vehicle.

4. Inspect and Replace Suspension Components

Sub-steps:
1. Remove the wheel to access suspension components.
2. Visually inspect control arms, bushings, and ball joints for wear.
3. Replace any worn components with OEM or high-quality aftermarket parts.
4. Reassemble the suspension and torque all bolts to specification.

5. Wheel Bearing Inspection and Replacement

Sub-steps:
1. Spin the wheel by hand to listen for grinding noise indicating a bad bearing.
2. Remove the wheel and brake assembly to access the wheel bearing.
3. Use a bearing puller to extract the bearing from the hub.
4. Install the new bearing and reassemble the brake and wheel assembly.

Tools Required:

Socket set
Torque wrench
Jack and jack stands
Bearing puller
Screwdrivers
Pliers

Parts Required:

Power steering fluid
CV joint or axle (if damaged)
Suspension components (if worn)
Wheel bearing (if necessary)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Disconnect the battery before working on electrical systems.
Allow the engine to cool before opening any components.
Use jack stands to secure the vehicle when working underneath it.