my Honda Accord 10th Generation (2018-2022) jerks when shifting gears what's going on

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

509 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before draining transmission fluid to avoid burns.

Symptoms

•Jerking or jolting sensation during gear shifts
•Slipping of gears
•Delay in acceleration after shifting
•Unusual noises during gear changes (clunking or grinding)
•Check engine light may illuminate (if transmission-related codes are present)

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes related to the transmission.
2
Inspect the transmission fluid level and condition; check for contamination or burnt smell.
3
Examine the transmission filter for blockages or wear.
4
Test the transmission control module (TCM) for functionality and update software if necessary.
5
Check for any visible leaks in the transmission system.
6
Inspect engine mounts and transmission mounts for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Funnel
•Transmission fluid
•Ramps or jack stands
•Socket set
•Gasket scraper
•New transmission filter and gasket
•Torque wrench

Parts Required

•Honda ATF DW-1 transmission fluid
•Transmission filter
•Gasket for transmission pan
•Engine/transmission mounts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes related to the transmission.
2
Inspect the transmission fluid level and condition; check for contamination or burnt smell.
3
Examine the transmission filter for blockages or wear.
4
Test the transmission control module (TCM) for functionality and update software if necessary.
5
Check for any visible leaks in the transmission system.
6
Inspect engine mounts and transmission mounts for wear or damage.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Gather necessary tools and parts.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick and remove it.
2. Insert a funnel into the dipstick tube and add the appropriate transmission fluid (Honda ATF DW-1).
3. Start the engine and shift through all gears while monitoring the fluid level.
4. If fluid is burnt or contaminated, proceed to drain and replace it.
Tools Required:
- Funnel
- Transmission fluid
- Ramps or jack stands (if necessary for access)

3. Inspect and Replace Transmission Filter

Sub-steps:
1. Remove the transmission pan by unscrewing the bolts and carefully lowering it.
2. Remove the old transmission filter and replace it with a new one.
3. Clean the transmission pan and replace the gasket before reattaching it.
Tools Required:
- Socket set
- Gasket scraper
- New transmission filter and gasket

4. Inspect and Replace Engine/Transmission Mounts

Sub-steps:
1. Lift the vehicle safely using a jack and secure it with jack stands.
2. Inspect the engine and transmission mounts for cracks or excessive wear.
3. If damaged, remove the old mounts and install new ones, ensuring proper alignment.
Tools Required:
- Socket set
- Torque wrench (for mounting bolts)