my Honda Accord 10th Generation (2018-2022) is shaking while driving what should I check

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

453 words

Problem Statement

Learn how to diagnose and fix shaking issues in your Honda Accord (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always engage the parking brake and use jack stands when lifting the vehicle.
•Wear safety glasses to protect eyes from debris during inspection and repair.

Symptoms

•Vibration felt in the steering wheel
•Shaking felt through the seats
•Excessive tire wear
•Noise while driving, especially at certain speeds
•Shaking worsens during acceleration or braking

Diagnostic Steps

1
Inspect tires for uneven wear and proper inflation.
2
Check wheel balance by having them balanced at a tire shop.
3
Inspect suspension components for wear or damage (e.g., struts, bushings).
4
Test drive the vehicle to determine if shaking is speed-dependent.
5
Check alignment settings and inspect for any misalignments.
6
Inspect CV joints and axles for damage or wear.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Tire pressure gauge
•Torque wrench

Parts Required

•Replacement tires (if needed)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear and proper inflation.
2
Check wheel balance by having them balanced at a tire shop.
3
Inspect suspension components for wear or damage (e.g., struts, bushings).
4
Test drive the vehicle to determine if shaking is speed-dependent.
5
Check alignment settings and inspect for any misalignments.
6
Inspect CV joints and axles for damage or wear.

Solution

1. Preparation

Gather tools: jack, jack stands, tire pressure gauge, and torque wrench.
Park the vehicle on a level surface and engage the parking brake.

2. Tire Inspection and Maintenance

Check Tire Pressure
- Use a tire pressure gauge to measure each tire's pressure.
- Inflate tires to manufacturer-recommended pressure if needed.
Inspect Tire Condition
- Examine tires for uneven wear patterns, bulges, or cracks.
- Replace any damaged tires.

3. Wheel Balancing and Alignment

Wheel Balancing
- Remove the wheels and take them to a tire shop for balancing.
- Ensure weights are correctly attached for proper balance.
Alignment Check
- Have a professional perform a wheel alignment.
- Adjust camber, caster, and toe settings to manufacturer specifications.

4. Suspension Inspection and Repair

Visual Inspection
- Check struts and shocks for leaks or damage.
- Inspect control arms, bushings, and sway bar links for wear.
Replace Worn Components
- If any suspension part is found to be worn, replace it following the manufacturer's specifications.

5. Drivetrain Inspection

CV Joint and Axle Inspection
- Inspect the CV joints for tearing or grease leaks.
- Replace any damaged CV boots or joints.