my Honda Accord 10th Generation (2018-2022) is shaking when I brake what's wrong

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

435 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system.
•Allow the brakes to cool down before inspection or repair.

Symptoms

•Shaking or vibration felt through the steering wheel when applying brakes
•Uneven wear on brake pads or rotors
•Increased stopping distance
•Possible grinding noise during braking
•Brake pedal pulsation

Diagnostic Steps

1
Inspect brake rotor condition for warping or uneven wear.
2
Check brake pad thickness and look for signs of uneven wear or damage.
3
Examine suspension components, including struts and control arms, for wear or damage.
4
Test brake calipers for proper operation and ensure they are not sticking.
5
Verify wheel alignment and balance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Torque wrench
•Bungee cord
•Brake cleaner

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotor condition for warping or uneven wear.
2
Check brake pad thickness and look for signs of uneven wear or damage.
3
Examine suspension components, including struts and control arms, for wear or damage.
4
Test brake calipers for proper operation and ensure they are not sticking.
5
Verify wheel alignment and balance.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat, stable surface and engage the parking brake.
Wear safety goggles and gloves.

2. Lift Vehicle

Use a jack to lift the front of the vehicle and secure it on jack stands.
Remove the front wheels using a lug wrench.

3. Inspect and Replace Brake Rotors

Inspection:
- Visually inspect the rotors for grooves, cracks, or warping using a caliper.
Replacement:
- If rotors are damaged, remove the caliper brackets using a socket set.
- Slide the caliper off the rotor and hang it using a bungee cord (do not let it dangle).
- Remove the rotor by unscrewing any retaining screws or pulling it off the hub.
- Install the new rotor, ensuring it is seated properly.
- Reattach the caliper bracket and torque to the manufacturer specifications.

4. Inspect and Replace Brake Pads

Remove the old brake pads from the caliper bracket.
Check the caliper slides for lubrication; clean and re-lubricate as needed.
Install new brake pads, ensuring they are seated correctly in the caliper bracket.

5. Reassemble and Lower Vehicle

Reattach the wheel and hand-tighten the lug nuts.
Lower the vehicle back to the ground and torque the lug nuts to the manufacturer's specifications.

6. Test Drive

Conduct a test drive to ensure that the shaking has been resolved and that the brakes function properly.

Tools Required:

Jack and jack stands
Lug wrench
Socket set
Torque wrench
Bungee cord
Brake cleaner

Parts Required:

Brake rotors (if warped)
Brake pads (if worn)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Always disconnect the battery before working on the braking system.
Allow the brakes to cool down before inspection or repair.