my Honda Accord 10th Generation (2018-2022) has a strong vibration when braking, what could it be?

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

596 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn to diagnose and fix strong vibrations when braking in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms and solutions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow the brakes to cool before working on them.
•Ensure the vehicle is securely supported on jack stands before working underneath.

Symptoms

•Strong vibrations felt in the steering wheel or brake pedal while braking
•Pulsation in the brake pedal during braking
•Abnormal noise (squeaking or grinding) when brakes are applied
•Uneven brake pad wear (if visually inspected)
•Potential pulling to one side when braking

Diagnostic Steps

1
Inspect brake pads for uneven wear or damage.
2
Check brake rotors for warping or scoring.
3
Examine brake calipers for proper operation and any signs of sticking.
4
Verify wheel alignment and balance.
5
Perform a test drive to assess braking behavior and vibration severity.
6
Scan for any error codes related to the ABS system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Brake caliper tool
•Micrometer or dial indicator
•OBD-II scanner

Parts Required

•Brake pads
•Brake rotors (if needed)
•Brake caliper hardware (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for uneven wear or damage.
2
Check brake rotors for warping or scoring.
3
Examine brake calipers for proper operation and any signs of sticking.
4
Verify wheel alignment and balance.
5
Perform a test drive to assess braking behavior and vibration severity.
6
Scan for any error codes related to the ABS system using an OBD-II scanner.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery for safety.

2. Wheel Removal

Using a socket set, loosen the lug nuts on the front wheels.
Lift the vehicle using a jack and secure it on jack stands.
Remove the front wheels completely.

3. Brake Pad and Rotor Inspection

Inspect the brake pads for wear; replace if less than 3mm thick.
Measure the thickness of the brake rotors with a micrometer. Replace if below manufacturer specifications (usually around 24mm for the Accord).
Check for warping using a dial indicator; if the rotor exceeds the runout specification, it should be resurfaced or replaced.

4. Brake Rotor Replacement (if needed)

Remove the caliper bolts using a socket set and slide the caliper off the rotor.
Secure the caliper with a bungee cord to avoid stress on the brake line.
Remove the rotor-holding screws (if applicable) and slide the rotor off the hub.
Install the new rotor, ensuring it sits flush against the hub.

5. Brake Pad Replacement (if needed)

Compress the brake caliper piston using a caliper tool.
Install new brake pads into the caliper bracket.
Reattach the caliper over the new pads and tighten the caliper bolts to the manufacturer's torque specifications (typically around 25-35 ft-lbs).

6. Reassembly

Reinstall the front wheels and hand-tighten the lug nuts.
Lower the vehicle from the jack stands.
Torque the lug nuts to the specified value (usually 80-100 ft-lbs).

7. Final Checks

Reconnect the battery.
Pump the brake pedal to seat the pads against the rotors.
Conduct a test drive to verify the repair.