my Honda Accord 10th Generation (2018-2022) has a check oil light on, what does it mean

Honda Accord 8th Generation (2008-2012)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

553 words

Problem Statement

Learn how to diagnose and fix the check oil light issue in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms and solutions.

Affected Component

Engine

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Allow the engine to cool before performing any maintenance.
•Ensure the vehicle is securely lifted if working underneath.

Symptoms

•Check oil light illuminated on the dashboard
•Engine noise or ticking sound
•Poor engine performance or rough idling
•Decreased fuel efficiency
•Oil leak under the vehicle
•Oil smell in the cabin

Diagnostic Steps

1
Check the engine oil level using the dipstick.
2
Inspect the oil for contamination or degradation (color and consistency).
3
Look for any visible oil leaks around the oil pan, seals, or gaskets.
4
Scan for any trouble codes using an OBD-II scanner.
5
Verify the last oil change date and mileage since the last change.
6
Inspect the oil filter for any signs of damage or leaks.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Oil filter wrench
•Socket set
•Oil catch pan
•Funnel
•Clean rags

Parts Required

•Engine oil (0W-20)
•Oil filter

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the engine oil level using the dipstick.
2
Inspect the oil for contamination or degradation (color and consistency).
3
Look for any visible oil leaks around the oil pan, seals, or gaskets.
4
Scan for any trouble codes using an OBD-II scanner.
5
Verify the last oil change date and mileage since the last change.
6
Inspect the oil filter for any signs of damage or leaks.

Solution

1. Preparation

Gather tools: oil filter wrench, socket set, oil catch pan, funnel, and clean rags.
Ensure the engine is cool, and the vehicle is parked on a level surface.

2. Check Oil Level and Condition

Remove the dipstick and wipe it clean with a rag.
Reinsert the dipstick, then remove it again to check the oil level.
If the oil is low, proceed to the next step.

3. Change Engine Oil

Drain Old Oil:
- Place the oil catch pan under the oil pan.
- Remove the drain plug using the socket set; allow the old oil to drain completely.
Replace Oil Filter:
- Use the oil filter wrench to remove the old oil filter.
- Lubricate the rubber O-ring of the new oil filter with a small amount of new oil.
- Install the new oil filter, hand-tighten it according to the manufacturer's specifications.
Add New Oil:
- Reinstall the drain plug and tighten to the specified torque (usually around 30 ft-lbs).
- Using a funnel, add the appropriate type and amount of new oil (typically 0W-20 for the Honda Accord).

4. Clean Up

Wipe any spillage and ensure the area is clean.
Dispose of the old oil and filter according to local regulations.

5. Reset the Oil Light

Turn on the ignition without starting the engine.
Press the gas pedal three times within 10 seconds.
The oil light should turn off.