FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Accord 10th Generation (2018-2022) has a check engine light and a rough idle what's wrong - Honda Accord
Home/Cars/Honda/Accord/8th Generation (2008-2012)/my Honda Accord 10th Generation (2018-2022) has a check engine light and a rough idle what's wrong

my Honda Accord 10th Generation (2018-2022) has a check engine light and a rough idle what's wrong

Honda Accord 8th Generation (2008-2012)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
519 words

Problem Statement

Diagnose and fix check engine light and rough idle in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic steps and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before performing any inspections or repairs.

Symptoms

  • •Check engine light illuminated
  • •Rough idle when the engine is running
  • •Possible engine stalling at low speeds
  • •Decreased fuel efficiency
  • •Unusual engine noises (e.g., knocking or sputtering)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Screwdrivers
  • •Multimeter

Parts Required

  • •Spark plugs
  • •Fuel filter (if necessary)
  • •Throttle body cleaner

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to prevent electrical shorts.

Tools Required:

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Screwdrivers
  • Multimeter (if testing electrical components)
2. Address Fault Codes
  • Use the OBD-II scanner to identify and document the trouble codes.
  • Research each code to determine the likely causes and necessary actions.
3. Inspect and Replace Spark Plugs
  • Remove the ignition coils using a socket set.
  • Take out the spark plugs and visually inspect them for wear.
  • Replace any worn or damaged spark plugs with new ones, ensuring proper gap settings.
4. Check and Clean the Air Intake System
  • Remove the air intake duct to access the throttle body.
  • Clean the throttle body using a throttle body cleaner and a soft brush.
  • Reinstall the air intake duct and ensure all connections are secure.
5. Inspect and Test Fuel System
  • Use a fuel pressure gauge to check the fuel pressure at the fuel rail.
  • Replace the fuel filter if pressure is below specifications or if it is clogged.
  • If necessary, inspect the fuel pump for proper operation.
6. Reconnect Battery and Test
  • Reconnect the negative battery terminal.
  • Start the engine and check for smooth idle.
  • Clear any trouble codes using the OBD-II scanner and monitor for reoccurrence.