how to reset the tire pressure monitoring system in my Honda Accord 10th Generation (2018-2022)?

Honda Accord 8th Generation (2008-2012)

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

392 words

Problem Statement

Learn how to reset the Tire Pressure Monitoring System (TPMS) in your Honda Accord 10th Generation (2018-2022) with this step-by-step guide.

Affected Component

Electrical

Estimated Time

15-30 minutes

Important safety information - read before proceeding

•Always ensure that tires are inflated to the recommended pressure before resetting the TPMS.

1
Verify that all tires are inflated to the manufacturer's recommended pressure.
2
Check for any visible damage or leaks in the tires.
3
Ensure that the spare tire (if equipped with a sensor) is also properly inflated.
4
Confirm that the vehicle is on a level surface and not in motion.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

2. Resetting the TPMS

Start the Vehicle:
- Insert the key or press the start button to turn on the ignition without starting the engine.
Locate the TPMS Reset Button:
- The TPMS reset button is typically located under the dashboard on the driver’s side, near the steering column. Refer to the owner’s manual if unsure.
Press and Hold the Reset Button:
- With the ignition on, press and hold the TPMS reset button until the TPMS indicator light blinks slowly three times, then release the button.
Drive the Vehicle:
- Drive the vehicle at speeds above 30 mph for about 10 minutes to allow the system to recalibrate.
Verify Reset:
- After driving, check if the TPMS warning light is off. If it remains illuminated, repeat the reset process.