how to reset the tire pressure light on Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

452 words

Problem Statement

Learn how to reset the tire pressure light on Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure position to avoid rolling while checking tire pressures.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Possible incorrect tire pressure reading
•Warning may persist even after correcting tire pressures
•Potential fluctuating tire pressure readings on the display

Diagnostic Steps

1
Check tire pressures using a reliable tire gauge; ensure all tires (including the spare, if applicable) are inflated to the manufacturer's recommended PSI.
2
Verify that there are no punctures or visible damage on any tire.
3
Confirm that the TPMS (Tire Pressure Monitoring System) sensors are functioning properly and have not been damaged.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge

Parts Required

•None (if no tire replacement is needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check tire pressures using a reliable tire gauge; ensure all tires (including the spare, if applicable) are inflated to the manufacturer's recommended PSI.
2
Verify that there are no punctures or visible damage on any tire.
3
Confirm that the TPMS (Tire Pressure Monitoring System) sensors are functioning properly and have not been damaged.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn off the engine and ensure the key is in the "OFF" position.
Gather necessary tools including the vehicle owner’s manual for reference.

2. Correct Tire Pressures

Sub-step 1: Inflate all tires to the recommended PSI as indicated on the driver’s side door jamb or in the owner's manual.
Sub-step 2: Recheck the tire pressures after inflating to confirm they are correct.

3. Reset the Tire Pressure Monitoring System

Sub-step 1: Turn the ignition switch to the "ON" position without starting the engine.
Sub-step 2: Locate the TPMS reset button, which is typically found beneath the steering column or near the driver's side dashboard.
Sub-step 3: Press and hold the TPMS reset button until the tire pressure light blinks three times, then release it.
Sub-step 4: Start the engine and allow the vehicle to run for about 20 minutes, which can help recalibrate the system.

4. Check for Light Reset

Sub-step 1: After the vehicle has run, check to see if the tire pressure warning light has turned off.
Sub-step 2: If the light remains on, recheck tire pressures and repeat the reset procedure.