how to reset the maintenance light on my Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

417 words

Problem Statement

Learn how to reset the maintenance light on your Honda Accord 10th Generation (2018-2022) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a level surface before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or service displayed
•No other engine-related warning lights present

Diagnostic Steps

1
Ensure the vehicle is turned off and in the park position.
2
Insert the key or press the start button without pressing the brake pedal to turn on the electrical system.
3
Locate the odometer display button on the dashboard.
4
Press and hold the odometer display button until the display shows 'Oil Life' or the percentage remaining.
5
Release the odometer display button, then press and hold it again for approximately 10 seconds until the 'Oil Life' resets to 100%.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for resetting the maintenance light.

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and in the park position.
2
Insert the key or press the start button without pressing the brake pedal to turn on the electrical system.
3
Locate the odometer display button on the dashboard.
4
Press and hold the odometer display button until the display shows 'Oil Life' or the percentage remaining.
5
Release the odometer display button, then press and hold it again for approximately 10 seconds until the 'Oil Life' resets to 100%.

Solution

1. Preparation

Gather necessary tools: none required for this process.
Ensure the vehicle is parked on a level surface and the ignition is off before beginning.

2. Turn on the Ignition

Insert the key into the ignition or press the start button without pressing the brake pedal to activate the electrical system (the dashboard lights will illuminate).

3. Access the Oil Life Display

Locate the odometer button (usually found on the dashboard near the speedometer).
Press and hold the odometer button until the "Oil Life" screen is displayed.

4. Reset the Oil Life

Once the "Oil Life" percentage is displayed, release the odometer button.
Press and hold the odometer button again for about 10 seconds.
The display will show a confirmation that the oil life has been reset, changing back to 100%.

5. Turn Off the Ignition

Turn off the ignition completely to save the settings.