how to reset the maintenance light on Honda Accord 8th Generation (2008-2012)

Honda Accord 8th Generation (2008-2012)

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

317 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 8th Generation (2008-2012) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual transmissions) before performing any resets.

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the 'Select/Reset' button on the dashboard.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Continue to hold the 'Select/Reset' button until the maintenance light blinks and then turns off.
5
Release the 'Select/Reset' button.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the 'Select/Reset' button on the dashboard.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Continue to hold the 'Select/Reset' button until the maintenance light blinks and then turns off.
5
Release the 'Select/Reset' button.

Solution

1. Preparation

2. Resetting the Maintenance Light

Turn Off the Ignition
- Ensure the vehicle is completely off.
Press and Hold the Button
- Locate the "Select/Reset" button on the instrument panel.
- Press and hold the button.
Turn the Ignition On
- While holding the "Select/Reset" button, turn the ignition key to the "ON" position (do not start the engine).
Watch for the Maintenance Light
- Continue holding the button until the maintenance light blinks and turns off. This usually takes about 10 seconds.
Release the Button
- Once the maintenance light is off, release the "Select/Reset" button.