how to reset the maintenance light on Honda Accord 8th Generation (2008-2012)

Honda Accord 8th Generation (2008-2012)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

317 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 8th Generation (2008-2012) after maintenance. Step-by-step guide for easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral and on a flat surface before performing the reset.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Owner has performed oil change or maintenance but light does not turn off
•Vehicle owner may be unsure if maintenance has been properly logged

Diagnostic Steps

1
Ensure the vehicle is in the OFF position and the key is removed.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Locate the 'Select/Reset' button on the dashboard, typically found near the speedometer.
4
Press the 'Select/Reset' button until the maintenance light resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the OFF position and the key is removed.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Locate the 'Select/Reset' button on the dashboard, typically found near the speedometer.
4
Press the 'Select/Reset' button until the maintenance light resets.

Solution

1. Preparation

Gather necessary tools: ignition key.
Ensure the vehicle is parked in a safe location and the engine is off.

2. Key Positioning

Insert the ignition key into the ignition switch.
Turn the key to the "ON" position without starting the engine.

3. Resetting the Maintenance Light

Locate the "Select/Reset" button on the instrument panel.
Press and hold the "Select/Reset" button for approximately 10 seconds until the maintenance light blinks and resets.
Release the button when the light turns off.