how to reset the maintenance light on Honda Accord 8th Generation (2008-2012)

Honda Accord 8th Generation (2008-2012)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

366 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 8th Generation (2008-2012). Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the instrument panel
•No associated performance issues with the vehicle

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' knob located on the instrument panel until the 'Oil Life' indicator is displayed.
3
While the 'Oil Life' is displayed, press and hold the 'Select/Reset' knob for about 10 seconds.
4
Release the knob when the oil life percentage begins to blink.
5
Press and hold the 'Select/Reset' knob again until the oil life resets to 100%.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' knob located on the instrument panel until the 'Oil Life' indicator is displayed.
3
While the 'Oil Life' is displayed, press and hold the 'Select/Reset' knob for about 10 seconds.
4
Release the knob when the oil life percentage begins to blink.
5
Press and hold the 'Select/Reset' knob again until the oil life resets to 100%.

Solution

1. Preparation

Ensure the ignition key is in the "OFF" position.
Gather all necessary tools.

2. Access the Maintenance Reset Procedure

Insert the ignition key and turn to the "ON" position (do not start the engine).
Ensure that all accessories are off (e.g., radio, lights).

3. Reset the Oil Life Indicator

Locate the "Select/Reset" knob on the instrument panel.
Press the "Select/Reset" knob until the "Oil Life" is displayed.
Press and hold the "Select/Reset" knob for approximately 10 seconds until the oil life percentage begins to blink.

4. Finalize the Reset

Release the knob when the blinking starts.
Press and hold the "Select/Reset" knob again until the oil life resets to 100%.
The maintenance light should turn off, indicating a successful reset.