how to reset the maintenance light on Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

400 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 10th Generation (2018-2022) with this step-by-step guide. Ensure your vehicle is ready for maintenance.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual transmissions) before turning the ignition to the 'ON' position.

Symptoms

•Maintenance light is illuminated on the dashboard
•Possible reminder messages displayed in the multi-information display
•No changes in vehicle performance or issues present

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'Home' button on the steering wheel.
3
Navigate to the 'Settings' menu using the display screen.
4
Select 'Vehicle Settings.'
5
Choose 'Maintenance Info.'
6
Select 'Reset' to clear the maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None required for this process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked safely and the engine is off.
Have the vehicle key fob ready to access the ignition.

2. Access the Ignition

Insert the key fob into the ignition slot (or press the start button without pressing the brake pedal).
Turn the ignition to the "ON" position. Do NOT start the engine.

3. Navigate to the Maintenance Settings

Press the "Home" button on the steering wheel controls.
Use the arrow buttons to scroll to the "Settings" option on the display screen.
Press the "Enter" button or tap on the screen to select it.

4. Reset Maintenance Light

Scroll down to "Vehicle Settings" and select it.
Choose "Maintenance Info" from the options.
Highlight "Reset" and select it. Confirm the reset action when prompted.

5. Verify Reset

Turn off the ignition and then turn it back to the "ON" position to check if the maintenance light has turned off.