how to reset the maintenance light on Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

368 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 10th Generation (2018-2022). Step-by-step guide to clear reminders and ensure proper maintenance.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral and on a flat surface when performing this procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminders for oil change or service due displayed on the screen
•Vehicle operating normally aside from the warning light

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Use the steering wheel controls to navigate to the 'Settings' menu on the display.
3
Select 'Maintenance' from the settings options.
4
Choose the specific maintenance item you wish to reset (e.g., oil change).
5
Confirm the reset action when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Parts Required:**
•None needed for the reset procedure.
•Estimated Repair Time:** 10-15 minutes
•Safety Warnings:**
•Ensure the vehicle is in park or neutral and on a flat surface when performing this procedure.

Parts Required

•None needed for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Use the steering wheel controls to navigate to the 'Settings' menu on the display.
3
Select 'Maintenance' from the settings options.
4
Choose the specific maintenance item you wish to reset (e.g., oil change).
5
Confirm the reset action when prompted.

Solution

1. Preparation

Ensure the vehicle is parked safely and the ignition is turned off.
Have the vehicle key or remote ready to access the ignition.

2. Access Ignition

Insert the key into the ignition or press the start button without pressing the brake pedal to activate the "ON" position.

3. Navigate the Display

Press the "Home" button on the infotainment system if applicable.
Use the steering wheel controls to scroll through the menu on the dashboard display.

4. Reset Maintenance Light

Select "Settings" from the menu.
Scroll down and select "Maintenance."
Choose the maintenance item you want to reset (e.g., "Oil Life").
Confirm the reset by selecting "Reset" or "Yes" when prompted.

5. Verify Reset

Check that the maintenance light is no longer illuminated by turning the ignition off and then back on.