how to reset the maintenance light on Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

363 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 10th Generation (2018-2022) after an oil change. Step-by-step guide for quick reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

1
Ensure the vehicle is turned off and in the 'OFF' position.
2
Press the 'Start' button without pressing the brake pedal to turn on the electrical systems (Accessory mode).
3
Use the 'Home' button on the steering wheel to navigate to the 'Settings' menu on the display.
4
Select 'Vehicle Settings' from the menu.
5
Choose 'Maintenance Info' and then select 'Oil Life.'

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is turned off and in the 'OFF' position.
2
Press the 'Start' button without pressing the brake pedal to turn on the electrical systems (Accessory mode).
3
Use the 'Home' button on the steering wheel to navigate to the 'Settings' menu on the display.
4
Select 'Vehicle Settings' from the menu.
5
Choose 'Maintenance Info' and then select 'Oil Life.'

Solution

Step 1: Turn the ignition to the “ON” position without starting the engine. (Press the Start button without the brake pedal.)
Step 2: Navigate to the "Settings" using the controls on the steering wheel.

2. Reset the Oil Life

Step 1: From the "Settings" menu, select "Vehicle Settings."
Step 2: Scroll to "Maintenance Info."
Step 3: Select "Oil Life" to access the oil life reset option.
Step 4: Press and hold the "Enter" button (or the “OK” button) until the oil life resets to 100%.

3. Confirm Reset