how to reset the maintenance light in Honda Accord 10th Generation (2018-2022)?

Honda Accord 8th Generation (2008-2012)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

384 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic steps and verification.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and will not roll while performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•No change in engine performance or operation
•No error codes are present in the OBD-II system
•Scheduled maintenance service has been completed but light remains on

Diagnostic Steps

1
Verify that the scheduled maintenance service has been completed.
2
Confirm that the vehicle is in the 'ON' position without starting the engine.
3
Check the dashboard for any additional warning lights that may indicate other issues.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle's ignition key
•Start button

Parts Required

•None required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Make sure the ignition is turned off before starting the reset process.

2. Turn on the Ignition

Insert the key into the ignition or press the start button without pressing the brake pedal.
Turn the key to the 'ON' position or press the start button until the dashboard lights illuminate.

Use the controls on the steering wheel to navigate to the 'Settings' menu on the driver’s display.
Select 'Maintenance' using the arrow buttons.

4. Reset the Maintenance Light

In the 'Maintenance' menu, select 'Oil Life' or 'Reset' (depending on your model).
Confirm the reset by selecting 'Yes' when prompted.

5. Verify the Reset

Turn off the ignition and then restart the vehicle.
Check that the maintenance light is no longer illuminated on the dashboard.