FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light Honda Accord 8th Generation (2008-2012) - Honda Accord
Home/Cars/Honda/Accord/8th Generation (2008-2012)/how to reset the maintenance light Honda Accord 8th Generation (2008-2012)

how to reset the maintenance light Honda Accord 8th Generation (2008-2012)

Honda Accord 8th Generation (2008-2012)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
334 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 8th Generation (2008-2012) with this step-by-step guide. Quick and easy solution.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or neutral before starting the reset process.

Symptoms

  • •Maintenance light remains illuminated after oil change or service
  • •Reminder for scheduled maintenance displayed on the dashboard
  • •No other warning lights present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this reset.
  • Ensure the vehicle is parked on a level surface and in "Park" (automatic) or neutral (manual).
2. Resetting the Maintenance Light
  1. Turn the ignition off completely.
  2. Press and hold the "SELECT/RESET" knob located on the instrument panel.
  3. While holding down the knob, turn the ignition key to the "ON" position (do not start the engine).
  4. Keep holding the knob until the maintenance light begins to blink and eventually turns off. This may take about 10 seconds.
  5. Release the "SELECT/RESET" knob.
  6. Turn the ignition back to the "OFF" position and then start the engine to verify that the maintenance light is no longer illuminated.