FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset my Honda Accord 8th Generation (2008-2012) maintenance light - Honda Accord
Home/Cars/Honda/Accord/8th Generation (2008-2012)/how to reset my Honda Accord 8th Generation (2008-2012) maintenance light

how to reset my Honda Accord 8th Generation (2008-2012) maintenance light

Honda Accord 8th Generation (2008-2012)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
364 words

Problem Statement

Learn how to reset the maintenance light on your 2008-2012 Honda Accord. Step-by-step guide to ensure your vehicle is ready for maintenance.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is stationary with the parking brake engaged before performing the reset.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •Possible reminder of service intervals or oil change
  • •No impact on vehicle performance but indicates maintenance needed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No special tools required.

Parts Required

  • •No parts required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is in a safe environment and the parking brake is engaged.
  • Gather necessary tools (if applicable).
2. Reset the Maintenance Light
  1. Ignition Off: Turn the ignition switch to the "OFF" position.
  2. Press and Hold: Press and hold the "Select/Reset" knob located on the instrument panel.
  3. Ignition On: While holding the knob, turn the ignition switch to "ON" without starting the engine.
  4. Hold Until Reset: Keep holding the "Select/Reset" knob until the maintenance light resets and displays "Maintenance Reset."
  5. Release Knob: Release the "Select/Reset" knob once the light has reset.
  6. Turn Off Ignition: Turn the ignition switch to the "OFF" position to complete the process.