how to reset my Honda Accord 10th Generation (2018-2022) maintenance light

Honda Accord 8th Generation (2008-2012)

Error Codes

15 minutes

Time

easy

Difficulty

low

Severity

3 min read

406 words

Problem Statement

Learn how to reset the maintenance light on your Honda Accord 10th Generation (2018-2022) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely and the engine is off before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Engine oil change reminder may be displayed
•Possible service due notification shown

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position, but the engine is not running.
2
Use the steering wheel controls to navigate to the 'Settings' menu on the dashboard display.
3
Select 'Vehicle Settings' from the menu options.
4
Choose 'Maintenance Info' and then select 'Reset.'
5
Confirm the reset action and check for any confirmation message.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure the vehicle is parked in a safe location with the engine off.
•Ensure the key fob is on or the vehicle is in accessory mode.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position, but the engine is not running.
2
Use the steering wheel controls to navigate to the 'Settings' menu on the dashboard display.
3
Select 'Vehicle Settings' from the menu options.
4
Choose 'Maintenance Info' and then select 'Reset.'
5
Confirm the reset action and check for any confirmation message.

Solution

1. Preparation

Tools Required: None needed.
Ensure the vehicle is parked in a safe location with the engine off.
Ensure the key fob is on or the vehicle is in accessory mode.

2. Accessing the Maintenance Light Reset

Turn the Ignition On:
- Insert the key fob or push the start button without starting the engine to enter accessory mode.
Navigate to Settings:
- Use the controls on the steering wheel to scroll through the menu on the instrument cluster display.
- Find and select the "Settings" option.
Select Vehicle Settings:
- Once in the Settings menu, scroll to "Vehicle Settings" and select it.

3. Reset Maintenance Light

Locate Maintenance Info:
- In the Vehicle Settings, find the "Maintenance Info" option and select it.
Perform Reset:
- Select "Reset" and confirm your choice when prompted.
- Observe if a confirmation message appears, indicating that the maintenance light has been successfully reset.