how to reset my Honda Accord 10th Generation (2018-2022) check engine light

Honda Accord 8th Generation (2008-2012)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

427 words

Problem Statement

Learn how to reset the check engine light on your Honda Accord 10th Generation (2018-2022) with this step-by-step guide. Ensure your vehicle runs smoothly.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged when performing any work.

Symptoms

•Check engine light illuminated on the dashboard
•Potentially stored diagnostic trouble codes (DTCs)
•No noticeable changes in engine performance (if the underlying issue is resolved)
•Possible reduced fuel efficiency (if the issue was not fixed)

Diagnostic Steps

1
Scan the vehicle’s OBD-II system using an OBD-II scanner to check for stored trouble codes.
2
Note any codes present and interpret their meaning to ensure any underlying issues are resolved before resetting the light.
3
Clear the codes using the OBD-II scanner and check if the check engine light turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None (assuming no underlying issues exist)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle’s OBD-II system using an OBD-II scanner to check for stored trouble codes.
2
Note any codes present and interpret their meaning to ensure any underlying issues are resolved before resetting the light.
3
Clear the codes using the OBD-II scanner and check if the check engine light turns off.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner.
Ensure the vehicle is parked on a level surface and the ignition is turned off.

2. Connect OBD-II Scanner

Locate the OBD-II port under the dashboard near the driver’s side.
Plug the OBD-II scanner into the port securely.

3. Turn On Ignition

Turn the vehicle’s ignition to the "ON" position without starting the engine.
Allow the scanner to power on and connect to the vehicle's system.

4. Check and Clear Codes

Follow the scanner's menu to select “Read Codes” and note any DTCs.
Once noted, select “Clear Codes” or “Erase Codes” option in the scanner’s menu.
Confirm the action when prompted and wait for the scanner to clear the codes.

5. Disconnect Scanner

Once the codes are cleared, safely disconnect the OBD-II scanner from the port.
Turn off the ignition.

6. Test the Vehicle

Start the engine and observe the dashboard for the check engine light status.
Allow the vehicle to run for a few minutes to ensure the light remains off.