how to reset maintenance light on Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

377 words

Problem Statement

Learn how to reset the maintenance light on your Honda Accord 10th Generation (2018-2022) with this easy step-by-step guide.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and on a flat surface before starting the reset procedure.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Reminder for maintenance appears on the display
•No engine performance issues present

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Use the steering wheel controls to navigate to the 'Settings' menu on the multi-information display.
3
Select 'Vehicle Settings' and then choose 'Maintenance Info.'
4
Highlight 'Maintenance Reset' or 'Reset.'
5
Confirm the reset by following on-screen prompts.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset procedure.

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Use the steering wheel controls to navigate to the 'Settings' menu on the multi-information display.
3
Select 'Vehicle Settings' and then choose 'Maintenance Info.'
4
Highlight 'Maintenance Reset' or 'Reset.'
5
Confirm the reset by following on-screen prompts.

Solution

1. Preparation

Ensure the vehicle is parked in a safe location with the ignition turned off.
Gather necessary tools: None required for this procedure.

2. Access the Ignition

Insert the key fob into the ignition or have the key ready if applicable.
Press the start button without pressing the brake pedal to turn on electrical systems.

3. Navigate to Maintenance Settings

Use the right-side steering wheel controls to press the "Home" button.
Scroll down to "Settings" and press "Enter."

4. Reset Maintenance Light

Select "Vehicle Settings" from the menu.
Scroll to "Maintenance Info" and select it.
Choose "Maintenance Reset" and confirm by selecting "Yes."

5. Confirm Reset

The display will show that the maintenance light has been reset.
Turn off the ignition and then restart the vehicle to ensure the maintenance light is no longer illuminated.