how to reset maintenance light on Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

355 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 10th Generation (2018-2022) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Engine runs smoothly post-maintenance

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Verify that the maintenance has been performed as indicated (oil change, filter replacement, etc.).
3
Check the owner's manual for any specific reset instructions related to the particular maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key
•Key fob

Parts Required

•None required for this process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure that the vehicle is parked safely with the engine off.
Have the vehicle key or remote ready to access the ignition system.

2. Turn on Ignition

Insert the key into the ignition or have the key fob ready.
Press the "Start" button twice without pressing the brake pedal (to turn on electrical systems without starting the engine).

3. Access the Settings

Use the controls on the steering wheel to navigate to the "Settings" menu on the Multi-Information Display (MID).
Scroll down and select "Maintenance Info."

4. Reset Maintenance Light

Select "Oil Life" or the specific maintenance item you wish to reset.
Press and hold the “Enter” button until the display prompts a confirmation to reset.
Confirm the reset by selecting "Yes."

5. Turn Off Ignition

Turn off the ignition completely.
Remove the key or turn off the key fob.