how to replace the brake pads on Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

4 min read

635 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to replace brake pads on Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and tools required.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Ensure the vehicle is securely lifted and supported before working underneath.

Symptoms

•Squeaking or squealing noise when braking
•Grinding noise indicating metal on metal contact
•Vibration or pulsation during braking
•Warning light illuminated on the dashboard
•Reduced braking efficiency
•Increased stopping distance

Diagnostic Steps

1
Inspect brake pad thickness visually through the wheel spokes.
2
Check for any warning lights related to the braking system using an OBD-II scanner.
3
Listen for any unusual noises while applying brakes at low speed.
4
Verify brake fluid level in the reservoir.
5
Conduct a road test to assess braking performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Socket set
•Caliper tool
•Brake cleaner
•Anti-seize compound
•Torque wrench

Parts Required

•New brake pads
•Brake rotor (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pad thickness visually through the wheel spokes.
2
Check for any warning lights related to the braking system using an OBD-II scanner.
3
Listen for any unusual noises while applying brakes at low speed.
4
Verify brake fluid level in the reservoir.
5
Conduct a road test to assess braking performance.

Solution

1. Preparation

Tools Required: Jack, jack stands, lug wrench, socket set, caliper tool, brake cleaner, anti-seize compound, torque wrench.
Park the vehicle on a level surface and engage the parking brake.
Gather all tools and new brake pads for the replacement.

2. Lift the Vehicle

Loosen the lug nuts on the front wheels while the vehicle is still on the ground.
Use a jack to lift the vehicle and securely place jack stands under the vehicle for safety.
Remove the lug nuts and take off the front wheels.

3. Remove Brake Caliper

Locate the caliper mounting bolts; use the socket set to remove them.
Carefully slide the caliper off the rotor and support it using a bungee cord or hang it from the suspension (do not let it dangle from the brake line).
Inspect the caliper for any damage or leaks.

4. Remove Old Brake Pads

Slide the old brake pads out of the caliper bracket. Note their orientation for reference when installing new pads.
Inspect the rotor for wear or damage; if necessary, consider resurfacing or replacing the rotor.

5. Install New Brake Pads

Apply a thin layer of anti-seize compound to the back of the new brake pads (optional).
Slide the new brake pads into the caliper bracket, ensuring they are oriented correctly.
If necessary, use a caliper tool to compress the caliper piston back into the caliper housing to accommodate the new pads.

6. Reinstall Brake Caliper

Carefully position the caliper over the new pads and rotor.
Reinstall and torque the caliper mounting bolts to the manufacturer's specifications (usually around 25-30 lb-ft).

7. Reassemble and Lower Vehicle

Reinstall the wheels and hand-tighten the lug nuts.
Lower the vehicle to the ground and then torque the lug nuts to the manufacturer's specifications (typically 80-100 lb-ft).

8. Final Checks

Pump the brake pedal several times to ensure the brake pads are seated properly and the brake fluid is distributed.
Check the brake fluid level and top off if necessary.