how to fix transmission jerking when shifting in my Honda Accord 10th Generation (2018-2022)?

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

609 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool before opening the transmission system.

Symptoms

•Jerky or harsh shifting between gears
•Delayed engagement when shifting into drive or reverse
•Noticeable RPM fluctuations during shifting
•Transmission slipping or losing power momentarily
•Check engine light may be illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for transmission-related trouble codes.
2
Inspect transmission fluid level and condition; ensure it’s at the correct level and not burned or contaminated.
3
Check for any leaks in the transmission system that may lead to low fluid levels.
4
Test the transmission control module (TCM) for proper functionality and ensure software is up to date.
5
Inspect the throttle position sensor (TPS) for accurate readings; a faulty sensor can lead to erratic shifting.
6
Examine the condition of the transmission mounts for signs of wear or damage that may cause jerking.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Fluid pump
•Funnel
•Transmission fluid checker

Parts Required

•Transmission fluid (specific to Honda specifications)
•Transmission filter (if applicable)
•Throttle position sensor (if replacement is needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for transmission-related trouble codes.
2
Inspect transmission fluid level and condition; ensure it’s at the correct level and not burned or contaminated.
3
Check for any leaks in the transmission system that may lead to low fluid levels.
4
Test the transmission control module (TCM) for proper functionality and ensure software is up to date.
5
Inspect the throttle position sensor (TPS) for accurate readings; a faulty sensor can lead to erratic shifting.
6
Examine the condition of the transmission mounts for signs of wear or damage that may cause jerking.

Solution

1. Preparation

Gather all necessary tools and parts. Ensure the vehicle is on a flat surface and the engine is cool.
Tools Required: OBD-II scanner, socket set, torque wrench, fluid pump, funnel, transmission fluid checker.
Safety Warnings: Disconnect the battery before working on electrical components.

2. Check and Replace Transmission Fluid

Locate the Transmission Dipstick: Remove the dipstick and check fluid level.
Inspect Fluid Condition: If the fluid is dark or has a burnt smell, it needs replacing.
Drain Old Fluid: Place a drain pan under the transmission pan, remove the pan bolts with a socket set, and allow the fluid to drain completely.
Replace Filter: If applicable, remove the old filter and install a new one, ensuring all seals are replaced.
Reinstall the Pan: Clean the pan and apply a new gasket if needed. Reinstall the pan with bolts torqued to manufacturer specifications.
Refill Transmission Fluid: Using a funnel, refill the transmission with the correct type and amount of fluid.

3. Update Transmission Control Module Software

Connect OBD-II Scanner: Access the vehicle’s computer system.
Check for Software Updates: Follow the scanner prompts to check if the TCM software is current.
Install Updates: If updates are available, follow the scanner instructions to update the TCM.

4. Inspect and Replace Throttle Position Sensor

Locate the TPS: Typically found on the throttle body.
Disconnect Electrical Connector: Remove the connector carefully.
Remove the Sensor: Unscrew the TPS from its mounting.
Install New Sensor: Position the new TPS and secure it with screws.
Reconnect the Connector: Ensure the electrical connection is secure.