how to fix the noise from the rear suspension in my Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

485 words

Problem Statement

Learn how to diagnose and fix rear suspension noise in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported on jack stands before working underneath it.
•Disconnect the battery if working near electrical components.

Symptoms

•Clunking or banging noise when driving over bumps
•Rattling noise while driving on uneven surfaces
•Diminished ride comfort or handling
•Visible wear on suspension components
•Noise increases or decreases with speed

Diagnostic Steps

1
Inspect the rear suspension components visually for any signs of wear or damage.
2
Check for loose bolts or fasteners in the rear suspension assembly.
3
Test the rear shock absorbers for proper function by pushing down on the rear of the vehicle and observing the rebound.
4
Examine the rear sway bar and bushings for wear or damage.
5
Listen for noise while bouncing the rear of the vehicle to isolate the source.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Floor jack
•Jack stands
•Socket set
•Torque wrench

Parts Required

•Rear shock absorbers (if damaged)
•Sway bar links (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the rear suspension components visually for any signs of wear or damage.
2
Check for loose bolts or fasteners in the rear suspension assembly.
3
Test the rear shock absorbers for proper function by pushing down on the rear of the vehicle and observing the rebound.
4
Examine the rear sway bar and bushings for wear or damage.
5
Listen for noise while bouncing the rear of the vehicle to isolate the source.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.

2. Lift the Vehicle

Use a jack to lift the rear of the vehicle.
Secure it with jack stands to ensure safety.
Tools Required: Floor jack, jack stands.

3. Inspect and Remove Components

Inspect the Rear Shocks:
- Check for any oil leaks or physical damage.
- If damaged, remove the shocks by unbolting the top and bottom mounting points.
Check the Sway Bar:
- Examine the sway bar links and bushings for wear.
- Remove any damaged sway bar links by unbolting them from the sway bar and the suspension.

4. Replace Worn Components

Install New Shock Absorbers:
- Install new shocks by placing them in position and tightening the top and bottom bolts to manufacturer specifications (typically around 30-40 ft-lbs).
Install New Sway Bar Links:
- Replace with new sway bar links if necessary, tightening to proper torque (usually around 35-45 ft-lbs).

5. Reassemble and Lower the Vehicle

Ensure all components are tightened securely.
Remove jack stands and lower the vehicle back to the ground.
Tools Required: Torque wrench, socket set.