how to fix P0011 camshaft timing problem in Honda Accord 10th Generation (2018-2022)

Solution

1. Preparation

• Gather the necessary tools and parts.
• Disconnect the battery to prevent any electrical shorts.
• Raise the vehicle and secure it with jack stands if necessary.

2. Change Engine Oil and Filter

• Sub-steps:
  1. Drain the old engine oil using a wrench to remove the oil drain plug.
  2. Replace the oil filter using an oil filter wrench.
  3. Reinstall the drain plug and refill the engine with the manufacturer-recommended oil.

Tools Required:

• Oil filter wrench
• Socket set

3. Replace VVT Solenoid

• Sub-steps:
  1. Disconnect the VVT solenoid electrical connector.
  2. Remove the mounting bolts of the VVT solenoid using a socket set.
  3. Replace with a new VVT solenoid and torque the bolts to the manufacturer’s specifications.
  4. Reconnect the electrical connector.

Tools Required:

• Socket set
• Torque wrench

4. Inspect and Adjust Timing Chain/Belt

• Sub-steps:
  1. Remove the necessary covers to access the timing chain/belt.
  2. Inspect the timing chain/belt for wear or misalignment.
  3. If the timing is off, realign or replace the timing chain/belt according to the manufacturer’s specifications.
  4. Reinstall covers and ensure everything is torqued correctly.

Tools Required:

• Socket set
• Torque wrench

5. Clear Error Codes and Test

• Sub-steps:
  1. Reconnect the battery.
  2. Use the OBD-II scanner to clear the P0011 code.
  3. Start the engine and allow it to reach operating temperature.

Tools Required:

• OBD-II scanner