how to fix my Honda Accord 10th Generation (2018-2022) that jerks when shifting

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

652 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, tools, and solutions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery to ensure safety during repairs.

Symptoms

•Jerking or hard shifts when changing gears
•Slipping sensation during acceleration
•Check engine light illuminated
•Delayed engagement when shifting from park to drive or reverse
•Unusual noises during shifting (grinding or clunking)

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Check the transmission fluid level and condition; look for signs of contamination or burning.
3
Inspect the transmission mounts for signs of wear or damage.
4
Test the throttle position sensor (TPS) for proper operation using a multimeter.
5
Check for vacuum leaks in the intake system that could affect engine performance.
6
Review the transmission control module (TCM) for software updates or known issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Screwdrivers
•Transmission fluid pump
•Safety gloves
•Safety goggles

Parts Required

•Transmission fluid (specific to Honda specifications)
•Throttle position sensor (if replacement is necessary)
•Transmission mounts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Check the transmission fluid level and condition; look for signs of contamination or burning.
3
Inspect the transmission mounts for signs of wear or damage.
4
Test the throttle position sensor (TPS) for proper operation using a multimeter.
5
Check for vacuum leaks in the intake system that could affect engine performance.
6
Review the transmission control module (TCM) for software updates or known issues.

Solution

1. Preparation

Gather required tools and parts.
Disconnect the battery to ensure safety during repairs.

Tools Required:

OBD-II scanner
Multimeter
Socket set
Torque wrench
Screwdrivers
Transmission fluid pump
Safety gloves and goggles

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission fluid dipstick (if applicable) or the fill plug.
2. Remove the dipstick or fill plug and check fluid level with the engine running.
3. If fluid is low, use a fluid pump to add the manufacturer-recommended transmission fluid.
4. If fluid is burnt or contaminated, drain the old fluid by removing the drain plug.
5. Replace with fresh transmission fluid, ensuring it meets Honda's specifications.
6. Recheck the fluid level after filling, and replace the dipstick or fill plug.

3. Inspect and Replace Transmission Mounts

Sub-steps:
1. Lift the vehicle securely on jack stands.
2. Visually inspect all transmission mounts for cracks or deterioration.
3. If damaged, remove the bolts securing the mounts using a socket set.
4. Replace with new mounts and torque the bolts to factory specifications (refer to service manual for exact torque values).
5. Lower the vehicle and perform a test shift to check for improvement.

4. Test and Replace Throttle Position Sensor (if necessary)

Sub-steps:
1. Locate the throttle position sensor on the throttle body.
2. Disconnect the electrical connector from the TPS.
3. Use a multimeter to check the resistance across the terminals; compare findings with specifications from the service manual.
4. If the TPS is faulty, remove the screws or bolts securing it and replace it with a new sensor.
5. Reconnect the electrical connector and clear any codes from the OBD-II scanner.

5. Update Transmission Control Module (if necessary)

Sub-steps:
1. Use the OBD-II scanner to check for TCM updates or recalls.
2. If applicable, connect to the manufacturer’s software and follow the steps to update the TCM.
3. Clear any diagnostic trouble codes after the update.