how to fix my Honda Accord 10th Generation (2018-2022) brakes grinding when I stop

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

582 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding brakes on Honda Accord 10th Generation (2018-2022). Step-by-step guide with tools and safety tips.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a flat surface and the parking brake is engaged.
•Ensure the vehicle is secure on jack stands before working underneath.
•Allow brakes and rotors to cool before handling.

Symptoms

•Grinding noise when braking
•Vibration or pulsation in the brake pedal
•Reduced braking performance
•Warning light illuminated on the dashboard
•Brake dust accumulation on wheels

Diagnostic Steps

1
Inspect brake pads for wear; check for thickness and uneven wear.
2
Examine brake rotors for scoring, grooves, or warping.
3
Check brake calipers for proper operation and any signs of leakage.
4
Inspect brake lines for damage or leaks.
5
Test brake fluid level and condition; look for contamination.
6
Listen for sounds while applying brakes at low speeds to identify specific locations of noise.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Brake cleaner
•Protective gloves
•Safety goggles
•Torque wrench

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear; check for thickness and uneven wear.
2
Examine brake rotors for scoring, grooves, or warping.
3
Check brake calipers for proper operation and any signs of leakage.
4
Inspect brake lines for damage or leaks.
5
Test brake fluid level and condition; look for contamination.
6
Listen for sounds while applying brakes at low speeds to identify specific locations of noise.

Solution

1. Preparation

Tools Required: Jack and jack stands, lug wrench, socket set, brake cleaner, protective gloves, safety goggles, torque wrench.
Safety Warnings: Ensure the vehicle is on a flat surface and the parking brake is engaged.

2. Raise the Vehicle

Use the jack to lift the front or rear of the vehicle (where grinding occurs).
Secure the vehicle with jack stands to prevent it from falling.

3. Remove Wheel

Loosen lug nuts using a lug wrench.
Remove the wheel to access the brake assembly.

4. Inspect and Replace Brake Pads

Inspect Pads:
- Check the thickness of the brake pads; replace if less than 3mm.
- Look for uneven wear or cracking.
Replace Pads:
1. Remove the caliper bolts using a socket set.
2. Carefully slide the caliper off the rotor.
3. Remove old brake pads from the caliper bracket.
4. Install new brake pads into the caliper bracket.
5. Reattach the caliper over the new pads and tighten bolts to manufacturer's specifications (typically 20-30 ft-lbs).

5. Inspect and Replace Brake Rotors (if necessary)

Inspect Rotors:
- Check for grooves, scoring, or warping.
Replace Rotors:
1. Remove the caliper bracket if it was not already removed.
2. Remove the rotor from the hub; may require tapping with a rubber mallet.
3. Clean the new rotor with brake cleaner to remove protective oil.
4. Install the new rotor onto the hub.
5. Reinstall the caliper bracket and secure it as per specifications.

6. Reassemble and Lower Vehicle

Reattach the wheel and hand-tighten lug nuts.
Lower the vehicle and then tighten the lug nuts to the specified torque (usually 80-100 ft-lbs).

7. Test the Brakes

Press the brake pedal several times to seat the new pads.
Check for any unusual noises or issues.