how to fix Honda Accord 10th Generation (2018-2022) rear view camera not working

Honda Accord 8th Generation (2008-2012)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

530 words

Problem Statement

Learn how to diagnose and fix the rear view camera issue in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shorts or shocks.

Symptoms

•Rear view camera display is blank or not activating
•"Camera System Malfunction" message on the dashboard
•Poor or no image quality when the camera activates
•Camera intermittently working or turning off
•No sound or warning beeps when reversing

Diagnostic Steps

1
Check for any error codes using an OBD-II scanner to identify issues related to the camera system.
2
Inspect the camera lens for dirt, moisture, or damage that may obstruct the view.
3
Verify the camera connection wiring for any visible damage or loose connections.
4
Test the display unit by checking if other features (like navigation or radio) are functioning correctly.
5
Examine the vehicle's reverse light switch to ensure it is operational, as it triggers the camera activation.
6
Conduct a continuity test on the camera wiring harness to ensure proper electrical flow.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdriver set
•Cleaning supplies

Parts Required

•Replacement rear view camera (if necessary)
•Replacement reverse light switch (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any error codes using an OBD-II scanner to identify issues related to the camera system.
2
Inspect the camera lens for dirt, moisture, or damage that may obstruct the view.
3
Verify the camera connection wiring for any visible damage or loose connections.
4
Test the display unit by checking if other features (like navigation or radio) are functioning correctly.
5
Examine the vehicle's reverse light switch to ensure it is operational, as it triggers the camera activation.
6
Conduct a continuity test on the camera wiring harness to ensure proper electrical flow.

Solution

1. Preparation

Gather tools: OBD-II scanner, multimeter, socket set, screwdriver set, cleaning supplies.
Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Inspect and Clean the Camera

Locate the rear view camera mounted on the trunk or rear bumper.
Use cleaning supplies to gently clean the camera lens and remove any obstructions.
Check for physical damage to the camera housing.

3. Check Camera Connections

Remove the rear trim panel (if applicable) to access the camera wiring.
Inspect the camera connector for corrosion or loose pins.
Reconnect the camera harness firmly and ensure no wires are pinched.

4. Test the Reverse Light Switch

Locate the reverse light switch on the transmission.
Use a multimeter to check for continuity while the vehicle is in reverse.
If faulty, replace the reverse light switch.

5. Replace the Camera (if necessary)

If the camera is confirmed faulty, disconnect the wiring harness from the camera.
Remove the old camera using the appropriate socket size to unfasten it from its mount.
Install the new camera in the reverse order and reconnect the wiring harness.