how to fix grinding brakes on Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

601 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding brakes on Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, tools, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses and gloves when working on brake systems.
•Allow the vehicle to cool before working on the brakes to avoid burns.

Symptoms

•Grinding noise when braking
•Vibration or pulsation in the brake pedal
•Reduced braking performance
•Brake warning light illuminated on the dashboard
•Visible wear or scoring on brake rotors

Diagnostic Steps

1
Inspect the brake pads visually for wear and thickness.
2
Check the brake rotors for any scoring, warping, or damage.
3
Use an OBD-II scanner to check for any related error codes.
4
Test drive the vehicle to confirm the grinding noise under braking conditions.
5
Assess the brake fluid level and condition.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Torque wrench
•Brake cleaner
•C-clamp or brake caliper tool
•OBD-II scanner

Parts Required

•New brake pads
•Brake rotors (if necessary)
•Brake fluid (if required)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and the emergency brake is engaged.
Disconnect the battery for safety.

Tools Required:

Jack and jack stands
Lug wrench
Socket set
Torque wrench
Brake cleaner
C-clamp or brake caliper tool
OBD-II scanner (if needed)

2. Remove Wheel

Use the lug wrench to loosen the lug nuts slightly while the vehicle is still on the ground.
Jack up the vehicle and securely place it on jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect Brake Components

Visually inspect the brake pads for wear. If they are less than 3mm thick, they need replacement.
Check the rotors for grooves or scoring. If damaged, they should be resurfaced or replaced.
Clean the brake dust off the components using brake cleaner.

4. Replace Brake Pads

Remove the caliper bolts using a socket wrench and slide the caliper off the rotor.
Use a C-clamp to compress the caliper piston back into the caliper housing to make room for the new pads.
Remove the old brake pads and install the new ones, ensuring they are oriented correctly.
Reattach the caliper over the new pads and torque the caliper bolts to the manufacturer’s specifications.

5. Replace or Resurface Rotors (if necessary)

If the rotors are damaged, remove them by unscrewing the rotor retaining screws if present.
Install new rotors or resurface existing ones according to the specifications provided by the manufacturer.
Ensure the rotors are clean and free of dust before reassembling.

6. Reassemble and Check

Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle from the jack stands and then torque the lug nuts to the specified value.
Reconnect the battery and check for any warning lights.