how to check for worn wheel bearings on my Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

551 words

Problem Statement

Learn how to check for worn wheel bearings on your Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic steps and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Allow the brakes to cool before touching components after a drive.

Symptoms

•Unusual grinding or humming noise while driving
•Vibration felt through the steering wheel
•Play or looseness in the wheel
•Uneven tire wear
•Pulling to one side while driving

Diagnostic Steps

1
Check for any visible signs of wear or damage on the wheel bearing area, including rust or oil leaks.
2
Jack up the vehicle and check for play in the wheel by grabbing it at the 12 and 6 o'clock positions and pushing/pulling.
3
Rotate the wheel by hand to listen for any grinding noises that may indicate a bearing issue.
4
Drive the vehicle at various speeds to listen for any abnormal noises or vibrations that increase with speed.
5
After a test drive, carefully touch the wheel hub to see if it is excessively hot, which can indicate a failing bearing.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Socket set
•Torque wrench
•Bearing puller
•Grease

Parts Required

•Replacement wheel bearing
•Brake caliper hardware (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any visible signs of wear or damage on the wheel bearing area, including rust or oil leaks.
2
Jack up the vehicle and check for play in the wheel by grabbing it at the 12 and 6 o'clock positions and pushing/pulling.
3
Rotate the wheel by hand to listen for any grinding noises that may indicate a bearing issue.
4
Drive the vehicle at various speeds to listen for any abnormal noises or vibrations that increase with speed.
5
After a test drive, carefully touch the wheel hub to see if it is excessively hot, which can indicate a failing bearing.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is on a flat surface, and engage the parking brake.

2. Lift the Vehicle

Tools Required: Jack, jack stands
Instructions:
1. Loosen the lug nuts on the wheel slightly before lifting.
2. Use the jack to lift the vehicle until the wheel is off the ground.
3. Secure the vehicle on jack stands for safety.

3. Remove the Wheel

Tools Required: Lug wrench
Instructions:
1. Remove the lug nuts completely.
2. Take the wheel off and set it aside.

4. Inspect and Test the Wheel Bearing

Tools Required: None
Instructions:
1. Grab the hub assembly at the 12 and 6 o'clock positions.
2. Push and pull to feel for any excessive play.
3. Rotate the hub by hand and listen for grinding or roughness.

5. Replace the Wheel Bearing (if necessary)

Tools Required: Socket set, torque wrench, bearing puller, grease
Instructions:
1. Remove the brake caliper and rotor to access the hub assembly.
2. Use a bearing puller to remove the worn bearing from the hub.
3. Clean the hub area and install the new bearing, ensuring it is seated properly.
4. Reassemble the brake rotor and caliper.
5. Reinstall the wheel and lug nuts, tightening them to the manufacturer’s specified torque (typically 80-100 ft-lbs for most Honda vehicles).