how to check for strut leaks on my Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

415 words

Problem Statement

Learn how to check for strut leaks on your Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and tools required.

Affected Component

Suspension

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a lifted vehicle.
•Ensure the vehicle is securely parked to prevent rolling.

Symptoms

•Excessive bouncing after hitting bumps
•Unusual noise when driving over rough surfaces
•Visible oil on the strut body
•Uneven tire wear
•Vehicle swaying during turns

Diagnostic Steps

1
Perform a visual inspection of the struts for oil leaks or damage.
2
Check for any physical damage or rust on the strut assembly.
3
Press down on the front or rear of the vehicle to test the suspension's responsiveness.
4
Inspect the surrounding components for signs of fluid leakage.
5
Use a flashlight to better illuminate the strut area during inspection.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Flashlight
•Clean cloth

Parts Required

•Replacement struts (if leaks are found)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Perform a visual inspection of the struts for oil leaks or damage.
2
Check for any physical damage or rust on the strut assembly.
3
Press down on the front or rear of the vehicle to test the suspension's responsiveness.
4
Inspect the surrounding components for signs of fluid leakage.
5
Use a flashlight to better illuminate the strut area during inspection.

Solution

1. Preparation

Gather necessary tools and materials.
Park the vehicle on a flat, level surface.
Engage the parking brake and set wheel chocks around the rear tires.

2. Lift the Vehicle

Using a hydraulic jack, lift the front or rear of the vehicle.
Secure the vehicle with jack stands for safety.

3. Visual Inspection

Tools Required: Flashlight, clean cloth
Check the strut assembly for any signs of oil leakage or damage. Wipe the strut body with a clean cloth to see if any oil comes off.
Inspect the rubber bushings and mounts for cracks or wear.

4. Bounce Test

Tools Required: None
Push down firmly on the front or rear of the vehicle.
Release and observe if the car bounces more than once. If it does, it may indicate that the struts are worn.

5. Document Findings

Take notes or pictures of any leaks or damage for future reference and repair needs.