how to check for Honda Accord 10th Generation (2018-2022) transmission error codes

Honda Accord 8th Generation (2008-2012)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

488 words

Problem Statement

Learn how to check for transmission error codes in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures and solutions.

Affected Component

Transmission

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a level surface when working with the ignition system.

Symptoms

•Check engine light illuminated
•Erratic shifting or slipping during gear changes
•Unresponsive transmission when shifting gears
•Delayed engagement when shifting into drive or reverse
•Rough or harsh shifting

Diagnostic Steps

1
Connect an OBD-II scanner to the vehicle’s diagnostic port, usually located under the dashboard near the driver's side.
2
Turn the ignition key to the 'On' position without starting the engine (or press the start button without pressing the brake pedal).
3
Navigate through the scanner menu to select the transmission control module (TCM) for error codes.
4
Record any stored error codes that appear on the scanner display.
5
Clear the error codes using the scanner and conduct a test drive to see if any codes reappear.
6
If codes reappear, note them for further analysis and check for any related symptoms.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle manual

Parts Required

•Transmission Fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Connect an OBD-II scanner to the vehicle’s diagnostic port, usually located under the dashboard near the driver's side.
2
Turn the ignition key to the 'On' position without starting the engine (or press the start button without pressing the brake pedal).
3
Navigate through the scanner menu to select the transmission control module (TCM) for error codes.
4
Record any stored error codes that appear on the scanner display.
5
Clear the error codes using the scanner and conduct a test drive to see if any codes reappear.
6
If codes reappear, note them for further analysis and check for any related symptoms.

Solution

1. Preparation

Gather tools and equipment.
Tools Required: OBD-II scanner, vehicle manual (for reference).
Ensure the vehicle is parked on a level surface with the ignition off.

2. Connect OBD-II Scanner

Locate the OBD-II diagnostic port under the dashboard.
Plug the OBD-II scanner into the port securely.

3. Retrieve Error Codes

Turn the ignition key to the “On” position or press the start button without engaging the brake.
Follow the scanner prompts to access the transmission control module.
Record any error codes displayed.

4. Clear Error Codes

Use the scanner’s function to clear the codes after recording them.
This may involve selecting a specific option like "Erase Codes" or "Clear Fault Codes."

5. Test Drive

Take the vehicle for a test drive to replicate any symptoms that may have caused the codes.
Pay attention to any changes in transmission behavior.

6. Analyze Reappearing Codes

If codes reappear, refer to the vehicle’s service manual for specific troubleshooting related to the error codes obtained.
Investigate wiring, connectors, and fluid levels related to the transmission system as per the codes.